MMA7360LR1 vs MMA7340LR1 Comparaison
Comparaison détaillée côte à côte de MMA7360LR1 par NXP Semiconductors et MMA7340LR1 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MMA7360LR1 | MMA7340LR1 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Motion Sensors | Motion Sensors |
| Statut du cycle de vie | Obsolete | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,42 | $3,85 |
| Type de capteur | 3-Axis Capacitive MEMS Accelerometer | 3-Axis Capacitive MEMS Accelerometer |
| Acceleration Range | ±1.5g, ±6g (selectable via g-Select pin) | ±3g, ±11g (selectable via g-Select) |
| Sensitivity (±1.5g mode, Vdd=3.3V) | 800 mV/g | — |
| Sensitivity (±6g mode, Vdd=3.3V) | 200 mV/g | — |
| Type de sortie | Analog, ratiometric (X, Y, Z) | Analog voltage (one VOUT per axis) |
| Bandwidth (X, Y axes) | 400 Hz | 400 Hz |
| Bandwidth (Z axis) | 300 Hz | 300 Hz |
| Tension d'alimentation | 2.2 V to 3.6 V | 2.2 V to 3.6 V (typical 3.3 V) |
| Supply Current (typical) | 400 uA | — |
| Self-Test Current | 1.5 mA (active) | — |
| 0g-Detect Output | Yes (linear freefall interrupt) | — |
| g-Select Input | Yes (logic high = ±6g, logic low = ±1.5g) | — |
| Température de fonctionnement | -40C to +85C | -40 C to +85 C |
| Boîtier | 14-LGA (3 mm x 5 mm x 1 mm) | 14-LGA (3 x 5 mm) |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant (Lead Free) | Compliant |
| Sensitivity (3g mode) | — | [DATA_NEEDED: 3g mode sensitivity mV/g] |
| Sensitivity (11g mode) | — | [DATA_NEEDED: 11g mode sensitivity mV/g] |
| Zero-g Offset (factory trimmed) | — | [DATA_NEEDED: zero-g offset V] |
| Filter | — | 1-pole low-pass |
| Self-Test | — | Yes (logic-level input) |
| Sleep Mode | — | Yes (logic-level input) |
| Supply Current (active) | — | [DATA_NEEDED: active supply current mA] |
| Supply Current (sleep) | — | [DATA_NEEDED: sleep supply current uA] |
| Lead-Free Status | — | Lead Free |