MPC17510EJR2 vs MPC17529EPR2 Comparaison
Comparaison détaillée côte à côte de MPC17510EJR2 par NXP Semiconductors et MPC17529EPR2 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPC17529EPR2 - Dual H-Bridge Motor Driver IC | NXP Semiconductors
MPC17529EPR2 ObsoleteComparaison des spécifications
| Paramètre | MPC17510EJR2 | MPC17529EPR2 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Obsolete |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,18 | $3,15 |
| Motor Type | DC Brushed | — |
| Topologie | H-Bridge (4 N-channel MOSFETs) | — |
| Operating Voltage Range | 2 V to 15 V | — |
| Continuous Output Current | 1.2 A | — |
| Peak Output Current | 3.8 A | — |
| On-Resistance (HS + LS per FET) | 0.5 ohm typ | — |
| PWM Frequency (max) | 200 kHz | — |
| Control Interface | CMOS Parallel (IN1, IN2, EN) | — |
| Charge Pump | Internal, with external CRES reservoir capacitor | — |
| Logic Input Level | TTL/CMOS compatible | — |
| Output Current Control | PWM current limit via external sense resistor | — |
| Température de fonctionnement | -20 C to +150 C (junction) | -20 C to +150 C [DATA_NEEDED: confirmed operating range from datasheet] |
| Boîtier | 24-pin TSSOPW (TSSOP with exposed thermal pad) | 24-QFN-EP (4x4 mm) |
| Type de montage | Surface Mount | Surface Mount |
| Protection Features | Undervoltage Lockout, Thermal Shutdown, Shoot-Through Protection | — |
| Niveau MSL | 3 (168 hours) | — |
| Statut RoHS | Compliant | — |
| Motor Type - Stepper | — | Bipolar |
| Motor Type - AC, DC | — | Brushed DC |
| Fonction | — | Driver - Fully Integrated, Control and Power Stage |
| Configuration de sortie | — | Half Bridge (4) |
| Interface | — | Parallel |
| Technology | — | CMOS |
| Tension d'alimentation | — | 2.7 V to 5.6 V |
| Load Voltage | — | 2 V to 6.8 V |
| Output Current | — | 700 mA per channel |
| Nombre de sorties | — | 1 (dual H-bridge) |
| Number of H-Bridges | — | 2 |
| Logic Input Compatibility | — | 3.3 V / 5 V CMOS |
| Applications | — | DC Motor Driver, Stepper Motor Driver, H-Bridge |