MPC17550EVEL vs MPC17529EPR2 Comparaison
Comparaison détaillée côte à côte de MPC17550EVEL par NXP Semiconductors et MPC17529EPR2 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPC17550EVEL - Dual H-Bridge Motor Driver IC | NXP Semiconductors
MPC17550EVEL ✓ ActifNXP Semiconductors
MPC17529EPR2 - Dual H-Bridge Motor Driver IC | NXP Semiconductors
MPC17529EPR2 ObsoleteComparaison des spécifications
| Paramètre | MPC17550EVEL | MPC17529EPR2 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Obsolete |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,17 | $3,15 |
| Topologie | Dual H-bridge DC motor driver | — |
| Nombre de sorties | 2 H-bridges (4 half-bridges) | 1 (dual H-bridge) |
| Motor Supply (VCC) | 2.0 V to 5.5 V | — |
| Continuous Output Current (per bridge) | 1.0 A RMS | — |
| Peak Output Current (per bridge) | 3.8 A | — |
| RDS(on) High-Side + Low-Side | 0.18 ohm typ at TA=25C | — |
| Logic Input Voltage | 1.8 V to 5 V CMOS-compatible | — |
| Charge Pump Frequency | [DATA_NEEDED: charge pump frequency] | — |
| Charge Pump Capacitor | 0.1 uF ceramic (CP pin to VCC) | — |
| Under-Voltage Lockout (UVLO) | Yes (VCC monitor) | — |
| Arrêt thermique | Yes | — |
| Limitation de courant | Yes (cycle-by-cycle) | — |
| Température de fonctionnement | -30 C to +85 C | -20 C to +150 C [DATA_NEEDED: confirmed operating range from datasheet] |
| Boîtier | 20-pin HVQFN (EVEL) 5x5 mm with exposed pad | 24-QFN-EP (4x4 mm) |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 (per JEDEC J-STD-020) | — |
| Lead-Free / RoHS | Lead-free, RoHS compliant per NXP product page | — |
| Motor Type - Stepper | — | Bipolar |
| Motor Type - AC, DC | — | Brushed DC |
| Fonction | — | Driver - Fully Integrated, Control and Power Stage |
| Configuration de sortie | — | Half Bridge (4) |
| Interface | — | Parallel |
| Technology | — | CMOS |
| Tension d'alimentation | — | 2.7 V to 5.6 V |
| Load Voltage | — | 2 V to 6.8 V |
| Output Current | — | 700 mA per channel |
| Number of H-Bridges | — | 2 |
| Logic Input Compatibility | — | 3.3 V / 5 V CMOS |
| Applications | — | DC Motor Driver, Stepper Motor Driver, H-Bridge |