MPVZ5010G7U vs MP3V5004GVP Comparaison
Comparaison détaillée côte à côte de MPVZ5010G7U par NXP Semiconductors et MP3V5004GVP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP
MPVZ5010G7U ✓ ActifNXP Semiconductors
MP3V5004GVP - 0-3.92kPa Gauge Pressure Sensor, 3V, SOP-8 | NXP
MP3V5004GVP ✓ ActifComparaison des spécifications
| Paramètre | MPVZ5010G7U | MP3V5004GVP |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $7,25 | $5,10 |
| Pressure Type | Vented Gauge | Gauge |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 3.92 kPa |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V (5 V typical) | — |
| Courant d'alimentation | 10 mA (maximum) | — |
| Analog Output Range | 0.2 V to 4.7 V | — |
| Accuracy | ±1.5 %FS (0 °C to 85 °C) | 5% over 0 to 80 C |
| Type de sortie | Analog, ratiometric to Vcc | Analog, ratiometric voltage |
| Response Time | [DATA_NEEDED: response time ms] | — |
| Plage de température de fonctionnement | 0 °C to +85 °C | — |
| Compensated Temperature Range | -10 °C to +60 °C | — |
| Storage Temperature Range | -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] | — |
| Boîtier | 8-DIP Module (Case 1368-01, through-hole) | SOP-8 (Small Outline Package) |
| Type de montage | Through-Hole (DIP module with vent tube) | Surface Mount |
| Sensor Technology | Piezoresistive silicon micromachined | — |
| Signal Conditioning | On-chip, temperature compensated, calibrated | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Body Height | 5.46 mm | — |
| Pressure Resolution | — | Gage, ratiometric |
| Tension d'alimentation | — | 2.7 V to 3.3 V (3 V typical) |
| Tension de sortie | — | 0.6 V to 3 V (ratiometric) |
| Température de fonctionnement | — | 0 C to +85 C |
| Pressure Port | — | Bottom port (Case 482A) |
| Media Compatibility | — | Dry air, non-corrosive gases |
| On-Chip Signal Conditioning | — | Yes (amplification + temperature compensation) |
| Calibration | — | Factory calibrated |
| Lead-Free | — | Yes |