MPVZ5010G7U vs MP3V5010GVP Comparaison

Comparaison détaillée côte à côte de MPVZ5010G7U par NXP Semiconductors et MP3V5010GVP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
MPVZ5010G7U MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP

MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP

MPVZ5010G7U ✓ Actif
NXP Semiconductors
MP3V5010GVP MP3V5010GVP - 10kPa Vented Gauge Pressure Sensor 3V | NXP

MP3V5010GVP - 10kPa Vented Gauge Pressure Sensor 3V | NXP

MP3V5010GVP ✓ Actif

Comparaison des spécifications

Paramètre MPVZ5010G7U MP3V5010GVP
Marque NXP Semiconductors NXP Semiconductors
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $7,25 $4,85
Pressure Type Vented Gauge Vented Gauge
Operating Pressure Range 0 kPa to 10 kPa (0 to 1.45 PSI) —
Supply Voltage (Vcc) 4.75 V to 5.25 V (5 V typical) —
Courant d'alimentation 10 mA (maximum) —
Analog Output Range 0.2 V to 4.7 V —
Accuracy ±1.5 %FS (0 °C to 85 °C) 5% (0 to 85 C)
Type de sortie Analog, ratiometric to Vcc Analog Voltage (ratiometric)
Response Time [DATA_NEEDED: response time ms] —
Plage de température de fonctionnement 0 °C to +85 °C —
Compensated Temperature Range -10 °C to +60 °C —
Storage Temperature Range -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] —
Boîtier 8-DIP Module (Case 1368-01, through-hole) SOP-8 (Case 1368-01), 8-SMD Module
Type de montage Through-Hole (DIP module with vent tube) Surface Mount
Sensor Technology Piezoresistive silicon micromachined —
Signal Conditioning On-chip, temperature compensated, calibrated —
Niveau MSL [DATA_NEEDED: MSL rating] —
Statut RoHS [DATA_NEEDED: RoHS status] Compliant
Body Height 5.46 mm —
Pressure Range — 0 kPa to 10 kPa (0 to 1.45 PSI)
Plage de tension de sortie — 0.1 V to 3.1 V
Tension d'alimentation — 2.7 V to 3.3 V (3 V nominal)
Sensitivity — 0.2 V/kPa nominal
Température de fonctionnement — -40 C to +125 C
Storage Temperature — -40 C to +125 C
Port Configuration — Vertical bottom-port male tube, 0.13" (3.17 mm)
Automotive Qualification — AEC-Q100
Packaging — Tray

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis