MPVZ5010G7U vs MPXV5004GC7U Comparaison

Comparaison détaillée côte à côte de MPVZ5010G7U par NXP Semiconductors et MPXV5004GC7U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
MPVZ5010G7U MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP

MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP

MPVZ5010G7U ✓ Actif
NXP Semiconductors
MPXV5004GC7U MPXV5004GC7U - 0-3.92 kPa Vented Gauge Pressure Sensor | NXP

MPXV5004GC7U - 0-3.92 kPa Vented Gauge Pressure Sensor | NXP

MPXV5004GC7U ✓ Actif

Comparaison des spécifications

Paramètre MPVZ5010G7U MPXV5004GC7U
Marque NXP Semiconductors NXP Semiconductors
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $7,25 $7,10
Pressure Type Vented Gauge Vented Gauge
Operating Pressure Range 0 kPa to 10 kPa (0 to 1.45 PSI) 0 kPa to 3.92 kPa (0 to 0.57 PSI)
Supply Voltage (Vcc) 4.75 V to 5.25 V (5 V typical) —
Courant d'alimentation 10 mA (maximum) —
Analog Output Range 0.2 V to 4.7 V —
Accuracy ±1.5 %FS (0 °C to 85 °C) +/- 1.5 percent VFSS
Type de sortie Analog, ratiometric to Vcc Analog, ratiometric voltage
Response Time [DATA_NEEDED: response time ms] —
Plage de température de fonctionnement 0 °C to +85 °C —
Compensated Temperature Range -10 °C to +60 °C —
Storage Temperature Range -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] —
Boîtier 8-DIP Module (Case 1368-01, through-hole) 8-pin DIP, 0.550 inch (13.97 mm), through-hole
Type de montage Through-Hole (DIP module with vent tube) Through-hole
Sensor Technology Piezoresistive silicon micromachined —
Signal Conditioning On-chip, temperature compensated, calibrated —
Niveau MSL [DATA_NEEDED: MSL rating] —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: rohs_status]
Body Height 5.46 mm —
Maximum Overpressure — 16 kPa
Tension d'alimentation — 4.75 V to 5.25 V (5 V typical)
Plage de tension de sortie — 1 V to 4.9 V
Sensitivity — 1 V/kPa (typical)
Température de fonctionnement — 0 C to +85 C
Storage Temperature — -30 C to +100 C
Port Type — Top port tube, 0.13 inch (3.17 mm) diameter
Media Compatibility — Dry non-corrosive gases

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis