MPX2102AP vs MPX2102A Comparaison
Comparaison détaillée côte à côte de MPX2102AP par STMicroelectronics et MPX2102A par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
MPX2102AP - 100kPa Absolute Pressure Sensor 4-SIP | STMicroelectronics
MPX2102AP ✓ ActifNXP Semiconductors
MPX2102A - 100 kPa Absolute Pressure Sensor | NXP Semiconductors
MPX2102A ObsoleteComparaison des spécifications
| Paramètre | MPX2102AP | MPX2102A |
|---|---|---|
| Marque | STMicroelectronics | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Obsolete |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $9,50 | $10,95 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 14.5 PSI (100 kPa) | 20 kPa to 100 kPa |
| Maximum Overload Pressure | 14.5 PSI (100 kPa) | — |
| Port Type | Male - 0.19" (4.93 mm) Tube | — |
| Type de sortie | Analog Wheatstone Bridge | Analog voltage (Wheatstone bridge, differential) |
| Tension de sortie | 0 mV to 40 mV at 10 V excitation | — |
| Tension d'alimentation | 10 V (typical ratiometric) | — |
| Linearity | ±0.5% (typ) | — |
| Température de fonctionnement | 0 °C to +85 °C | — |
| Boîtier | 4-SIP Module (Unibody) | — |
| Type de montage | Through-Hole | Through-Hole (SIP) |
| Diaphragm Technology | Silicon Piezoresistive | — |
| Response Time | [DATA_NEEDED: response time ms] | [DATA_NEEDED: response time in ms] |
| Statut RoHS | Compliant | Compliant (per NXP product page) |
| Style | Tube Port | — |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Output Span | — | 0 mV to 40 mV at 10 V supply |
| Supply Voltage (Excitation) | — | 10 V typical |
| Pressure Linearity | — | [DATA_NEEDED: % of full scale - verify in datasheet] |
| Plage de température de fonctionnement | — | -40C to +125C |
| Boîtier / Format | — | 4-SIP Module (Case 344-15), through-hole |
| Port Style | — | Barbed pressure port (axial) |
| Technology | — | Silicon piezoresistive (MEMS) with on-chip thin-film compensation |
| Temperature Compensation | — | On-chip (laser trimmed) -40C to +125C |
| Bridge Resistance | — | [DATA_NEEDED: input/output bridge resistance] |
| Niveau MSL | — | Not applicable (through-hole, no moisture sensitivity rating) |