MPX2200GP vs MPX2202GP Comparaison

Comparaison détaillée côte à côte de MPX2200GP par STMicroelectronics et MPX2202GP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
MPX2202GP MPX2202GP - 200 kPa Gauge Pressure Sensor, 4-SIP, 10V | NXP

MPX2202GP - 200 kPa Gauge Pressure Sensor, 4-SIP, 10V | NXP

MPX2202GP ✓ Actif

Comparaison des spécifications

Paramètre MPX2200GP MPX2202GP
Marque STMicroelectronics NXP Semiconductors
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $14,20 $24,80
Manufacturer STMicroelectronics —
Type de capteur Pressure Sensor - Vented Gauge —
Operating Pressure Range 0 kPa to 200 kPa (0 to 29.01 PSI) 0 kPa to 200 kPa (0 to 29.01 PSI)
Maximum Overpressure [DATA_NEEDED: maximum overpressure rating] —
Port Type Male - 0.19 inch (4.93 mm) Tube —
Type de sortie Analog Wheatstone Bridge —
Full-Scale Span 0 mV to 40 mV (typical, at 10 V excitation) —
Excitation Voltage 10 V (typical DC) —
Pressure Reference Vented Gauge (atmospheric backside) —
Température de fonctionnement [DATA_NEEDED: operating temperature range] -40 C to +125 C [DATA_NEEDED: confirm from datasheet curves]
Bridge Resistance [DATA_NEEDED: input/output bridge resistance] —
Linearity [DATA_NEEDED: linearity percentage] —
Temperature Compensation On-chip (laser-trimmed) —
Boîtier / Format 4-SIP Module (4-344C) 4-SIP Top Port Module
Type de montage Through-Hole Through Hole
Port Side Single port —
Statut RoHS Compliant (per distributor listing) [DATA_NEEDED: RoHS compliance]
Pressure Type — Vented Gauge
Maximum Overload Pressure — [DATA_NEEDED: maximum overload pressure]
Tension de sortie — 0 mV to 40 mV (at 10 V excitation)
Tension d'alimentation — 10 V DC nominal
Courant d'alimentation — [DATA_NEEDED: supply current]
Port Size — Male, 0.19 in (4.93 mm) Tube
Termination Style — Through-Hole (PCB)
Accuracy — [DATA_NEEDED: linearity / accuracy specification]
Media Compatibility — Dry air or non-corrosive gases (per datasheet)
Compensation — On-chip temperature compensated and calibrated

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis