MPX2202ASX vs MPX2202DP Comparaison
Comparaison détaillée côte à côte de MPX2202ASX par NXP Semiconductors et MPX2202DP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MPX2202ASX | MPX2202DP |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $10,45 | $25,14 |
| Type de capteur | Absolute Pressure Sensor | — |
| Operating Pressure Range | 0 kPa to 200 kPa (0 PSI to 29.01 PSI) | — |
| Maximum Overpressure | 58.02 PSI (400 kPa) | — |
| Type de sortie | Analog Voltage (Wheatstone bridge differential) | Analog differential voltage |
| Output Voltage Span | 0 mV to 40 mV at 10 V excitation | — |
| Excitation Voltage | 10 V (typical) | — |
| Pressure Port | Male 0.19 inch (4.93 mm) barbed tube | — |
| Pressure Type | Absolute (vs. sealed vacuum reference) | Differential (dual port, tube inlet) |
| Sensing Technology | Silicon piezoresistive, on-chip temperature compensated & calibrated | — |
| Temperature Compensation | 0 C to +85 C (on-chip) | — |
| Linearity / Hysteresis | approximately 1.0 %VFSS max [DATA_NEEDED: exact spec from datasheet] | — |
| Boîtier / Format | 4-SIP Module (through-hole) | 4-SIP Module (Case 867C) |
| Type de montage | Through-Hole | Through-hole (4-SIP tube inlet) |
| Port / Termination | Solder | — |
| Nombre de broches | 4 | — |
| Statut RoHS | unknown | RoHS compliant |
| Compatible Media | Dry non-corrosive gases (air) | — |
| Pressure Range | — | 0 to 200 kPa (0 to 29.01 PSI) |
| Tension d'alimentation | — | 10 V typical |
| Full-Scale Span | — | 40 mV typical at 10 V supply |
| Offset | — | 0 mV typical |
| Linearity | — | 1.0% typical |
| Pressure Hysteresis | — | 2.0% maximum |
| Temperature Compensated Range | — | 0 C to 85 C |
| Port Type | — | Dual tube, male, 0.19" (4.93 mm) tube |
| Température de fonctionnement | — | -40 C to +125 C [DATA_NEEDED: confirm exact op-temp range from datasheet] |
| Technology | — | Silicon piezoresistive, on-chip temperature compensated and calibrated |