MPX4250D vs MPX4250AP Comparaison
Comparaison détaillée côte à côte de MPX4250D par NXP Semiconductors et MPX4250AP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPX4250D - 250 kPa Differential Pressure Sensor 0.2-4.9 V | NXP/ST
MPX4250D ✓ ActifComparaison des spécifications
| Paramètre | MPX4250D | MPX4250AP |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $11,50 | $8,10 |
| Type de capteur | Differential Pressure Sensor | — |
| Pressure Range | 0 kPa to 250 kPa (0 to 36.26 psi) | 20 kPa to 250 kPa (2.9 psi to 36.26 psi) |
| Type de sortie | Analog Voltage (ratiometric) | Analog, ratiometric |
| Plage de tension de sortie | 0.2 V to 4.9 V | 0.2 V to 4.9 V |
| Supply Voltage (Vs) | 4.85 V to 5.35 V (5.0 V typical) | — |
| Full-Scale Span | 4.7 V (typical) | — |
| Accuracy | 1.0 % full-scale (0 °C to 85 °C) | [DATA_NEEDED: total error %] |
| Response Time | 4.7 ms (typical) | — |
| Température de fonctionnement | -40 °C to +125 °C | -40C to +125C |
| Pressure Port Type | Dual longitudinal (differential) | — |
| Boîtier / Format | 6-SIP Module | — |
| Type de montage | Through-Hole (SIP) | Through-Hole SIP, PCB vertical mount |
| On-Chip Signal Conditioning | Yes (calibrated, temperature-compensated) | Yes (amplified, calibrated, temperature-compensated) |
| Technology | Piezoresistive MEMS, silicon diaphragm | — |
| Statut RoHS | [DATA_NEEDED: explicit RoHS statement not in web data] | [DATA_NEEDED: RoHS compliance] |
| Manufacturer (Original) | Motorola Semiconductor; now NXP / STMicroelectronics | — |
| Pressure Type | — | Absolute (Manifold Absolute Pressure) |
| Pressure Range - Barometric Reference | — | 0 kPa to 250 kPa absolute (internal vacuum reference) |
| Tension d'alimentation | — | 5.0 V nominal (4.85 V to 5.35 V ratiometric) |
| Full-Scale Span (VFSO) | — | 4.6 V typical |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Sensitivity | — | Approx. 20 mV/kPa (linear, ratiometric) |
| Storage Temperature | — | [DATA_NEEDED: storage temperature range] |
| Boîtier | — | 6-SIP Module (6-pin SIP, through-hole, tube inlet) |
| Tube Inlet | — | Male 0.19 inch (4.93 mm) outer diameter |
| Port Style | — | Single axial tube port (barbed for 4.93 mm tube) |
| Nombre de broches | — | 6 (4 functional + 2 NC pins) |
| Lead-Free | — | Yes (per datasheet ordering information) |