MPX5050DP vs MPX5100DP Comparaison
Comparaison détaillée côte à côte de MPX5050DP par NXP Semiconductors et MPX5100DP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPX5100DP - 0-100kPa Differential Pressure Sensor 5V 6-SIP | NXP
MPX5100DP ✓ ActifComparaison des spécifications
| Paramètre | MPX5050DP | MPX5100DP |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,65 | $12,03 |
| Manufacturer | NXP Semiconductors | — |
| Type de capteur | Differential Pressure Sensor | — |
| Operating Principle | Piezoresistive (MEMS silicon) | — |
| Pressure Range | 0 kPa to 50 kPa (0 PSI to 7.25 PSI) | — |
| Pressure Port Type | Differential, dual tube port (Male, 0.19" / 4.93 mm Tube) | — |
| Type de sortie | Analog ratiometric voltage | Analog, ratiometric to Vcc |
| Plage de tension de sortie | 0.2 V to 4.7 V | 0.2 V to 4.7 V (ratiometric, ~4.5 V span) |
| Full-Scale Span | 4.5 V typical | — |
| Tension d'alimentation | 5.0 V nominal (4.75 V to 5.25 V) | — |
| Sensitivity | 90 mV/kPa typical | 45 mV/kPa nominal |
| Accuracy | [DATA_NEEDED: full temperature accuracy band] | ±2.5% (0 to 85 °C) |
| Response Time | 1 ms typical | — |
| Overpressure Rating | 200 kPa | — |
| Température de fonctionnement | -40C to +125C | -40 °C to +125 °C |
| Boîtier | 6-SIP Module (SOT1693-1 / Case 1351-01) | 6-SIP Module (through-hole) |
| Type de montage | Through-Hole (with dual pressure ports) | Through-Hole (SIP) |
| Courant d'alimentation | [DATA_NEEDED: quiescent supply current] | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Pressure Type | — | Differential |
| Operating Pressure Range | — | 0 kPa to 100 kPa (0 to 14.5 PSI) |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Supply Voltage (Vcc) | — | 5 V (nominal) |
| Response Bandwidth | — | 1 kHz (typical) |
| Port Configuration | — | Dual ports, male 0.19" (4.93 mm) tube, same side |
| Signal Conditioning | — | On-chip amplifier, temperature compensation, calibration |
| Technology | — | Piezoresistive MEMS with bipolar ASIC |
| Lead-Free | — | [DATA_NEEDED: lead-free status] |