MPXA6115A6U vs MPXAZ6115APT1 Comparaison
Comparaison détaillée côte à côte de MPXA6115A6U par NXP Semiconductors et MPXAZ6115APT1 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MPXA6115A6U | MPXAZ6115APT1 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $10,80 | $8,95 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Type de sortie | Analog Voltage | Analog, ratiometric |
| Plage de tension de sortie | 0.2 V to 4.7 V | 0.2 V to 4.7 V |
| Tension d'alimentation | 4.75 V to 5.25 V | 4.75 V to 5.25 V (5 V nominal) |
| Accuracy | +/-1.5% | — |
| Température de fonctionnement | -40C to +125C | -40 C to +125 C |
| Boîtier | 8-SMD Module (SOP 8) | 8-SMD, Gull Wing |
| Port Type | Single axial port (top) | — |
| Type de montage | Surface Mount | Surface Mount |
| Sensor Technology | Piezoresistive (silicon MEMS) | — |
| Signal Conditioning | On-chip bipolar op-amp with thin-film resistors | On-chip, temperature compensated and calibrated |
| Temperature Compensation | Yes, on-chip calibrated | — |
| Statut RoHS | Compliant | Compliant |
| Part Status | Active | — |
| Port Style | — | Male 0.13 inch (3.17 mm) tube, side port |
| Media Compatibility | — | Media resistant (non-corrosive gases) |
| Accuracy (typ) | — | [DATA_NEEDED: accuracy %FS] |
| Sensitivity | — | [DATA_NEEDED: V/kPa or mV/kPa] |
| Response Time | — | [DATA_NEEDED: response time ms] |
| Current Consumption | — | [DATA_NEEDED: supply current mA] |
| Bridge Type | — | On-chip silicon strain-gauge (piezo-resistive) |