MPXAZ6115APT1 vs MPXAZ6115AC6U Comparaison
Comparaison détaillée côte à côte de MPXAZ6115APT1 par NXP Semiconductors et MPXAZ6115AC6U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MPXAZ6115APT1 | MPXAZ6115AC6U |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,95 | $8,40 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Plage de tension de sortie | 0.2 V to 4.7 V | 0.2 V to 4.7 V |
| Tension d'alimentation | 4.75 V to 5.25 V (5 V nominal) | 5.0 V typical (4.75 V to 5.25 V) |
| Type de sortie | Analog, ratiometric | Analog Voltage |
| Port Style | Male 0.13 inch (3.17 mm) tube, side port | Top Port, Male 0.13" (3.17 mm) Tube |
| Boîtier | 8-SMD, Gull Wing | 8-SMD, Gull Wing, Top Port |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | -40 C to +125 C | -40C to +125C |
| Media Compatibility | Media resistant (non-corrosive gases) | Media Resistant (dry gases, isolated from harsh media) |
| Accuracy (typ) | [DATA_NEEDED: accuracy %FS] | — |
| Sensitivity | [DATA_NEEDED: V/kPa or mV/kPa] | — |
| Response Time | [DATA_NEEDED: response time ms] | — |
| Current Consumption | [DATA_NEEDED: supply current mA] | — |
| Bridge Type | On-chip silicon strain-gauge (piezo-resistive) | — |
| Signal Conditioning | On-chip, temperature compensated and calibrated | On-chip bipolar op-amp + thin-film resistor networks |
| Statut RoHS | Compliant | Compliant |
| Courant d'alimentation | — | [DATA_NEEDED: supply current typical mA] |
| Accuracy | — | +/-1.5% Vfss (max) |
| Port Type | — | Single Axial Barbed |
| Temperature Compensation | — | Built-in (calibrated across full range) |