MPXC2011DT1 vs MPX2010DP Comparaison
Comparaison détaillée côte à côte de MPXC2011DT1 par NXP Semiconductors et MPX2010DP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPXC2011DT1 - 10kPa Differential Pressure Sensor 4-SSIP | NXP
MPXC2011DT1 ✓ ActifComparaison des spécifications
| Paramètre | MPXC2011DT1 | MPX2010DP |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $14,95 | $8,50 |
| Pressure Type | Differential | — |
| Operating Pressure Range | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) | — |
| Full-Scale Output | 25 mV typical at 10 V excitation | — |
| Sensitivity | 2.5 mV/kPa typical | — |
| Excitation Voltage | 3 V DC to 10 V DC (10 V nominal) | — |
| Type de sortie | Analog Wheatstone bridge (ratiometric) | Analog voltage, Wheatstone bridge (mV level) |
| Boîtier | 4-SSIP Chip Pak module, side port | — |
| Port Style | Female, 3.25 mm (0.128 in) barbed side port | — |
| Termination Style | Through-hole PCB, 4 leads | — |
| Température de fonctionnement | 0 °C to +85 °C | -40 °C to +125 °C |
| Compensation | On-chip temperature compensated and calibrated | — |
| Technology | Piezoresistive silicon strain gauge | Piezoresistive (silicon strain gauge bridge) |
| Module Dimensions | 7.6 mm x 12.8 mm nominal | — |
| Type de montage | Through-hole (PCB mount with side-port tubing) | — |
| Statut RoHS | [DATA_NEEDED: RoHS status not in web data] | Compliant |
| Type de capteur | — | Differential Pressure Sensor |
| Pressure Range | — | 0 to 10 kPa (0 to 1.45 PSI) |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| Tension d'alimentation | — | 10 V DC typical (max 16 V) |
| Linearity | — | ±0.05% (typ) |
| Temperature Compensation | — | 0 °C to +85 °C (on-chip) |
| Response Time | — | 1.0 ms (typical) |
| Maximum Overpressure | — | 75 kPa |
| Burst Pressure | — | 200 kPa |
| Port Configuration | — | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |
| Media Compatibility | — | Dry air or non-corrosive gas |