MPXH6115A6U vs MPXHZ6115AC6T1 Comparaison
Comparaison détaillée côte à côte de MPXH6115A6U par NXP Semiconductors et MPXHZ6115AC6T1 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPXH6115A6U - 15-115 kPa Absolute Pressure Sensor, SOIC-8 | NXP
MPXH6115A6U ✓ ActifNXP Semiconductors
MPXHZ6115AC6T1 - 15-115kPa Absolute Pressure Sensor | NXP | SSOP-8
MPXHZ6115AC6T1 ✓ ActifComparaison des spécifications
| Paramètre | MPXH6115A6U | MPXHZ6115AC6T1 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $9,95 | $6,65 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) absolute |
| Maximum Over-Pressure | 400 kPa | — |
| Sensitivity | 45.9 mV/kPa (typical) | 45.9 mV/kPa (nominal) |
| Accuracy (0C to 85C) | 1.5 % (max) | — |
| Plage de tension de sortie | 0.2 V to 4.7 V | 0.2 V to 4.7 V (at 5 V supply) |
| Tension d'alimentation | 4.75 V to 5.25 V | — |
| Courant d'alimentation | 6 mA (typical) | — |
| Température de fonctionnement | -40C to +125C | -40 °C to +125 °C |
| Compensated Temperature | 0C to +85C | — |
| Type de sortie | Analog, ratiometric to VCC | Analog, ratiometric to VCC |
| Boîtier | 8-SOIC (0.295", 7.50 mm width) with top-side pressure port | 8-SSOP (0.335 inch, 8.50 mm width), top port |
| Type de montage | Surface Mount | — |
| Pressure Port | Vertical/Horizontal axial port (case variant 6) | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance] | — |
| Media Compatibility | Dry air, non-corrosive gases only | — |
| Maximum Overpressure | — | 400 kPa (58.02 PSI) |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Port Style | — | Top port, male 0.13 inch (3.3 mm) tube |
| Termination Style | — | Gull wing, surface mount |
| Media Protection | — | Media Resistant Gel coating |
| On-Chip Signal Conditioning | — | Yes (bipolar op-amp + thin-film network) |
| Temperature Compensation | — | On-chip, calibrated |
| Automotive Qualification | — | AEC-Q100 |