MPXH6115AC6T1 vs MPXHZ6115AC6T1 Comparaison
Comparaison détaillée côte à côte de MPXH6115AC6T1 par STMicroelectronics et MPXHZ6115AC6T1 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
MPXH6115AC6T1 - 15-115 kPa Absolute Pressure Sensor | STMicroelectronics
MPXH6115AC6T1 ✓ ActifNXP Semiconductors
MPXHZ6115AC6T1 - 15-115kPa Absolute Pressure Sensor | NXP | SSOP-8
MPXHZ6115AC6T1 ✓ ActifComparaison des spécifications
| Paramètre | MPXH6115AC6T1 | MPXHZ6115AC6T1 |
|---|---|---|
| Marque | STMicroelectronics | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $5,85 | $6,65 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) absolute |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Output Voltage Span | 0.2 V to 4.7 V (at VCC = 5.0 V) | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Courant d'alimentation | [DATA_NEEDED: typical supply current] | — |
| Accuracy | 1.5% (over compensated temperature range) | — |
| Temperature Compensation Range | -40 C to +125 C | — |
| Type de sortie | Analog, ratiometric | Analog, ratiometric to VCC |
| Boîtier / Format | 8-SSOP (0.335", 8.50 mm width), Top Port | — |
| Pressure Port | Male 0.13" (3.3 mm) tube, top-side | — |
| Type de montage | Surface Mount | — |
| Température de fonctionnement | -40 C to +125 C | -40 °C to +125 °C |
| Media Compatibility | Dry gases (non-corrosive) | — |
| Statut RoHS | Compliant | — |
| Niveau MSL | [DATA_NEEDED: MSL level] | — |
| Maximum Overpressure | — | 400 kPa (58.02 PSI) |
| Plage de tension de sortie | — | 0.2 V to 4.7 V (at 5 V supply) |
| Sensitivity | — | 45.9 mV/kPa (nominal) |
| Port Style | — | Top port, male 0.13 inch (3.3 mm) tube |
| Boîtier | — | 8-SSOP (0.335 inch, 8.50 mm width), top port |
| Termination Style | — | Gull wing, surface mount |
| Media Protection | — | Media Resistant Gel coating |
| On-Chip Signal Conditioning | — | Yes (bipolar op-amp + thin-film network) |
| Temperature Compensation | — | On-chip, calibrated |
| Automotive Qualification | — | AEC-Q100 |