MPXH6115AC6U vs MPXH6115A6U Comparaison

Comparaison détaillée côte à côte de MPXH6115AC6U par NXP Semiconductors et MPXH6115A6U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
MPXH6115AC6U MPXH6115AC6U - 15-115 kPa Absolute Pressure Sensor, 5V, 8-SOIC

MPXH6115AC6U - 15-115 kPa Absolute Pressure Sensor, 5V, 8-SOIC

MPXH6115AC6U ✓ Actif
NXP Semiconductors
MPXH6115A6U MPXH6115A6U - 15-115 kPa Absolute Pressure Sensor, SOIC-8 | NXP

MPXH6115A6U - 15-115 kPa Absolute Pressure Sensor, SOIC-8 | NXP

MPXH6115A6U ✓ Actif

Comparaison des spécifications

Paramètre MPXH6115AC6U MPXH6115A6U
Marque NXP Semiconductors NXP Semiconductors
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $5,75 $9,95
Pressure Type Absolute Absolute
Operating Pressure Range 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI)
Plage de tension de sortie 0.2 V to 4.7 V (at 5 V supply) 0.2 V to 4.7 V
Tension d'alimentation 4.75 V to 5.25 V (5 V typical) 4.75 V to 5.25 V
Sensitivity 45.9 mV/kPa (typical) 45.9 mV/kPa (typical)
Boîtier 8-SOIC (0.335 inch, 8.50 mm width) Top Port 8-SOIC (0.295", 7.50 mm width) with top-side pressure port
Port Type Male - 0.13 inch (3.3 mm) Tube, Top —
Plage de température de fonctionnement -40 C to +125 C —
Compensated Temperature Range 0 C to +85 C —
Signal Conditioning On-chip bipolar op-amp + thin-film resistor network —
Type de sortie Analog, ratiometric to VCC Analog, ratiometric to VCC
Type de montage Surface Mount Surface Mount
Technology Piezoresistive MEMS, monolithic silicon —
Port Orientation Top-side vertical —
Niveau MSL [DATA_NEEDED: MSL rating] —
Statut RoHS Compliant [DATA_NEEDED: RoHS compliance]
Maximum Over-Pressure — 400 kPa
Accuracy (0C to 85C) — 1.5 % (max)
Courant d'alimentation — 6 mA (typical)
Température de fonctionnement — -40C to +125C
Compensated Temperature — 0C to +85C
Pressure Port — Vertical/Horizontal axial port (case variant 6)
Media Compatibility — Dry air, non-corrosive gases only

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis