MPXH6115AC6U vs MPXHZ6115AC6T1 Comparaison

Comparaison détaillée côte à côte de MPXH6115AC6U par NXP Semiconductors et MPXHZ6115AC6T1 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
MPXH6115AC6U MPXH6115AC6U - 15-115 kPa Absolute Pressure Sensor, 5V, 8-SOIC

MPXH6115AC6U - 15-115 kPa Absolute Pressure Sensor, 5V, 8-SOIC

MPXH6115AC6U ✓ Actif
NXP Semiconductors
MPXHZ6115AC6T1 MPXHZ6115AC6T1 - 15-115kPa Absolute Pressure Sensor | NXP | SSOP-8

MPXHZ6115AC6T1 - 15-115kPa Absolute Pressure Sensor | NXP | SSOP-8

MPXHZ6115AC6T1 ✓ Actif

Comparaison des spécifications

Paramètre MPXH6115AC6U MPXHZ6115AC6T1
Marque NXP Semiconductors NXP Semiconductors
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $5,75 $6,65
Pressure Type Absolute Absolute
Operating Pressure Range 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) absolute
Plage de tension de sortie 0.2 V to 4.7 V (at 5 V supply) 0.2 V to 4.7 V (at 5 V supply)
Tension d'alimentation 4.75 V to 5.25 V (5 V typical) —
Sensitivity 45.9 mV/kPa (typical) 45.9 mV/kPa (nominal)
Boîtier 8-SOIC (0.335 inch, 8.50 mm width) Top Port 8-SSOP (0.335 inch, 8.50 mm width), top port
Port Type Male - 0.13 inch (3.3 mm) Tube, Top —
Plage de température de fonctionnement -40 C to +125 C —
Compensated Temperature Range 0 C to +85 C —
Signal Conditioning On-chip bipolar op-amp + thin-film resistor network —
Type de sortie Analog, ratiometric to VCC Analog, ratiometric to VCC
Type de montage Surface Mount —
Technology Piezoresistive MEMS, monolithic silicon —
Port Orientation Top-side vertical —
Niveau MSL [DATA_NEEDED: MSL rating] —
Statut RoHS Compliant —
Maximum Overpressure — 400 kPa (58.02 PSI)
Supply Voltage (VCC) — 4.75 V to 5.25 V
Port Style — Top port, male 0.13 inch (3.3 mm) tube
Température de fonctionnement — -40 °C to +125 °C
Termination Style — Gull wing, surface mount
Media Protection — Media Resistant Gel coating
On-Chip Signal Conditioning — Yes (bipolar op-amp + thin-film network)
Temperature Compensation — On-chip, calibrated
Automotive Qualification — AEC-Q100

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis