MPXH6300A6U vs MPXH6300AC6U Comparaison

Comparaison détaillée côte à côte de MPXH6300A6U par STMicroelectronics et MPXH6300AC6U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
MPXH6300AC6U MPXH6300AC6U - 20-304kPa Absolute Pressure Sensor 5V SOP-8 | NXP

MPXH6300AC6U - 20-304kPa Absolute Pressure Sensor 5V SOP-8 | NXP

MPXH6300AC6U ⚠ Dernier achat

Comparaison des spécifications

Paramètre MPXH6300A6U MPXH6300AC6U
Marque STMicroelectronics NXP Semiconductors
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Actif Dernier achat
Statut du stock In Stock In Stock
Prix unitaire (USD) $8,10 $7,80
Pressure Type Absolute Absolute (vacuum-referenced)
Operating Pressure Range 20 kPa to 304 kPa (2.9 PSI to 44.09 PSI) —
Plage de tension de sortie 0.3 V to 4.9 V —
Sensitivity 16.2 mV/kPa (typical) 16.2 mV/kPa (typical)
Tension d'alimentation 4.74 V to 5.46 V (5.0 V nominal) —
Courant d'alimentation 10 mA (maximum) —
Type de sortie Analog voltage, ratiometric to Vcc Analog, ratiometric to VCC
Température de fonctionnement -40 C to +125 C -40 C to +125 C
Compensated Temperature Range 0 C to 85 C —
Accuracy +/-1.5% VFSS (typical, over compensated range) +/- 1.5% VFSS (0 C to 85 C)
Boîtier 8-SOIC (0.295 inch / 7.50 mm wide body) 8-SOIC / SSOP-8 (0.335 inch / 8.50 mm width), Top Port
Type de montage Surface Mount Surface Mount
Port Configuration Single axial port, top side —
Signal Conditioning On-chip bipolar op-amp + thin-film resistor network —
Technology Piezoresistive MEMS with integrated ASIC —
Response Time [DATA_NEEDED: response time] —
Pressure Hysteresis [DATA_NEEDED: pressure hysteresis value] —
Statut RoHS Compliant Compliant
Pressure Range — 20 kPa to 304 kPa (2.9 PSI to 44.09 PSI)
Supply Voltage (VCC) — 4.75 V to 5.25 V (5 V typical)
Output Voltage Span — 0.3 V to 4.9 V
Port Style — Axial top port for 0.13 inch (3.3 mm) tube
On-chip Signal Conditioning — Yes (bipolar op amp + thin-film resistor network)
Compensation — On-chip temperature compensated and calibrated
Niveau MSL — [DATA_NEEDED: MSL rating]
Automotive Grade — AEC-Q100 qualified (MPXH6300A series)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis