MPXHZ6115A6T1 vs MPXA6115A6T1 Comparaison
Comparaison détaillée côte à côte de MPXHZ6115A6T1 par NXP Semiconductors et MPXA6115A6T1 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPXHZ6115A6T1 - 15-115 kPa Absolute Pressure Sensor | NXP | 8-SOIC
MPXHZ6115A6T1 ✓ ActifSTMicroelectronics
MPXA6115A6T1 - 15-115 kPa Absolute Pressure Sensor | STMicroelectronics
MPXA6115A6T1 ✓ ActifComparaison des spécifications
| Paramètre | MPXHZ6115A6T1 | MPXA6115A6T1 |
|---|---|---|
| Marque | NXP Semiconductors | STMicroelectronics |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $10,85 | $12,05 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) |
| Maximum Overpressure | 400 kPa (58.02 PSI) | — |
| Type de sortie | Analog Voltage | Analog Voltage |
| Plage de tension de sortie | 0.2 V to 4.7 V (at 5 V supply) | — |
| Tension d'alimentation | 5 V (typical, [DATA_NEEDED: full min/max range]) | 4.75 V to 5.25 V |
| Accuracy | ±1.5% (0 °C to 85 °C) | ±1.5% FS |
| Temperature Compensation Range | -40 °C to +125 °C | — |
| Plage de température de fonctionnement | -40 °C to +125 °C | — |
| Boîtier | 8-SOIC (0.295", 7.50 mm Width), Surface Mount | 8-SMD Gull Wing (SOP 8-surface-mount module) |
| Port Style | No Port (media-resistant PPS surface mount) | Single horizontal port (axial) |
| Sensor Technology | MEMS silicon strain-gauge with bipolar op-amp signal conditioning | — |
| Type de montage | Surface Mount (PPS thermoplastic) | Surface Mount |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant (per distributor listings) |
| Media Compatibility | Media-resistant PPS package; dry gas media recommended | — |
| Tension de sortie | — | 0.2 V to 4.7 V (at 5 V supply) |
| Termination Style | — | PCB / Gull Wing |
| Température de fonctionnement | — | -40 °C to +125 °C |
| Signal Conditioning | — | On-chip bipolar op-amp + thin-film resistor network |
| Temperature Compensation | — | On-chip, calibrated |
| Niveau MSL | — | [DATA_NEEDED: MSL level] |
| Output Function | — | Ratiometric to supply voltage |