MPXHZ6115A6T1 vs MPXHZ6115AC6U Comparaison
Comparaison détaillée côte à côte de MPXHZ6115A6T1 par NXP Semiconductors et MPXHZ6115AC6U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPXHZ6115A6T1 - 15-115 kPa Absolute Pressure Sensor | NXP | 8-SOIC
MPXHZ6115A6T1 ✓ ActifNXP Semiconductors
MPXHZ6115AC6U - 15-115kPa Absolute Pressure Sensor, 5V | NXP
MPXHZ6115AC6U ✓ ActifComparaison des spécifications
| Paramètre | MPXHZ6115A6T1 | MPXHZ6115AC6U |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $10,85 | $7,25 |
| Pressure Type | Absolute | — |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | — |
| Maximum Overpressure | 400 kPa (58.02 PSI) | — |
| Type de sortie | Analog Voltage | Analog Voltage |
| Plage de tension de sortie | 0.2 V to 4.7 V (at 5 V supply) | 0.2 V to 4.7 V (at VCC = 5 V) |
| Tension d'alimentation | 5 V (typical, [DATA_NEEDED: full min/max range]) | — |
| Accuracy | ±1.5% (0 °C to 85 °C) | ±1.5 % over -40 °C to +125 °C |
| Temperature Compensation Range | -40 °C to +125 °C | — |
| Plage de température de fonctionnement | -40 °C to +125 °C | -40 °C to +125 °C |
| Boîtier | 8-SOIC (0.295", 7.50 mm Width), Surface Mount | 8-SOIC (0.335 in / 8.50 mm width), top port |
| Port Style | No Port (media-resistant PPS surface mount) | Top port, 3.3 mm (0.13 in) tube |
| Sensor Technology | MEMS silicon strain-gauge with bipolar op-amp signal conditioning | — |
| Type de montage | Surface Mount (PPS thermoplastic) | Surface Mount |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant |
| Media Compatibility | Media-resistant PPS package; dry gas media recommended | Dry air, non-corrosive gases (PPS gel barrier) |
| Type de capteur | — | Absolute Pressure Sensor |
| Pressure Range | — | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V (5 V typical) |
| Sensitivity | — | 45.9 mV/kPa (typical) |
| Compensated Temperature Range | — | 0 °C to +85 °C |
| On-chip Signal Conditioning | — | Yes (amplified, temperature-compensated, calibrated) |
| Niveau MSL | — | [DATA_NEEDED: MSL level] |