MPXHZ6115AC6U vs MPXH6115AC6U Comparaison
Comparaison détaillée côte à côte de MPXHZ6115AC6U par NXP Semiconductors et MPXH6115AC6U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPXHZ6115AC6U - 15-115kPa Absolute Pressure Sensor, 5V | NXP
MPXHZ6115AC6U ✓ ActifNXP Semiconductors
MPXH6115AC6U - 15-115 kPa Absolute Pressure Sensor, 5V, 8-SOIC
MPXH6115AC6U ✓ ActifComparaison des spécifications
| Paramètre | MPXHZ6115AC6U | MPXH6115AC6U |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $7,25 | $5,75 |
| Type de capteur | Absolute Pressure Sensor | — |
| Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | — |
| Type de sortie | Analog Voltage | Analog, ratiometric to VCC |
| Plage de tension de sortie | 0.2 V to 4.7 V (at VCC = 5 V) | 0.2 V to 4.7 V (at 5 V supply) |
| Supply Voltage (VCC) | 4.75 V to 5.25 V (5 V typical) | — |
| Sensitivity | 45.9 mV/kPa (typical) | 45.9 mV/kPa (typical) |
| Accuracy | ±1.5 % over -40 °C to +125 °C | — |
| Plage de température de fonctionnement | -40 °C to +125 °C | -40 C to +125 C |
| Compensated Temperature Range | 0 °C to +85 °C | 0 C to +85 C |
| Port Style | Top port, 3.3 mm (0.13 in) tube | — |
| Boîtier | 8-SOIC (0.335 in / 8.50 mm width), top port | 8-SOIC (0.335 inch, 8.50 mm width) Top Port |
| Type de montage | Surface Mount | Surface Mount |
| Media Compatibility | Dry air, non-corrosive gases (PPS gel barrier) | — |
| On-chip Signal Conditioning | Yes (amplified, temperature-compensated, calibrated) | — |
| Niveau MSL | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL rating] |
| Statut RoHS | Compliant | Compliant |
| Pressure Type | — | Absolute |
| Operating Pressure Range | — | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) |
| Tension d'alimentation | — | 4.75 V to 5.25 V (5 V typical) |
| Port Type | — | Male - 0.13 inch (3.3 mm) Tube, Top |
| Signal Conditioning | — | On-chip bipolar op-amp + thin-film resistor network |
| Technology | — | Piezoresistive MEMS, monolithic silicon |
| Port Orientation | — | Top-side vertical |