MPXV2102DP vs MPXV2102GP Comparaison

Comparaison détaillée côte à côte de MPXV2102DP par NXP Semiconductors et MPXV2102GP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
MPXV2102DP MPXV2102DP - 100kPa Differential Pressure Sensor 8-BSOP | NXP

MPXV2102DP - 100kPa Differential Pressure Sensor 8-BSOP | NXP

MPXV2102DP ✓ Actif
NXP Semiconductors
MPXV2102GP MPXV2102GP - 100 kPa Gage Pressure Sensor | NXP

MPXV2102GP - 100 kPa Gage Pressure Sensor | NXP

MPXV2102GP ⚠ Dernier achat

Comparaison des spécifications

Paramètre MPXV2102DP MPXV2102GP
Marque NXP Semiconductors NXP Semiconductors
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Actif Dernier achat
Statut du stock In Stock In Stock
Prix unitaire (USD) $11,85 $5,60
Pressure Type Differential Vented Gauge
Operating Pressure Max 14.5 PSI (100 kPa) —
Type de sortie Analog Voltage (Wheatstone Bridge) —
Output Span 0 mV to 40 mV at 10 V excitation —
Full Scale Output (typ) 40 mV at 10 V —
Supply Voltage (Excitation) 10 V typical (16 V max) 10 V DC typical
Température de fonctionnement -40 C to +125 C -40 °C to +125 °C
Compensated Temperature 0 C to 85 C —
Boîtier 8-BSOP (0.475" / 12.06 mm width) Dual Ports, Same Side —
Port Size Male 0.19" (4.93 mm) Tube 0.13" (3.17 mm) Tube
Port Configuration Dual Ports, Same Side —
Output Impedance 1.1 kohm nominal —
Technology Piezoresistive silicon MEMS, on-chip temperature compensated Piezoresistive (silicon strain gauge Wheatstone bridge)
Type de montage Surface Mount (BSOP) Surface Mount
Statut RoHS Compliant Compliant
Lead Free Yes —
Pressure Linearity [DATA_NEEDED: Pressure Linearity %FS] —
Operating Pressure Range — 0 kPa to 100 kPa (0 to 14.5 PSI)
Maximum Overpressure — [DATA_NEEDED: maximum overpressure rating]
Full-Scale Output (Typical) — 40 mV at 10 V
Sensitivity (Typical) — 0.4 mV/kPa
Offset (Trimmed) — ±1 mV (after laser trim)
Linearity — ±0.25% of span (typ)
Storage Temperature — [DATA_NEEDED: storage temperature]
Input Resistance (Bridge) — 400 Ω typical
Output Resistance (Bridge) — [DATA_NEEDED: output resistance]
Response Time — [DATA_NEEDED: response time]
Boîtier / Format — 8-SMD, Gull Wing, Side Port (SOP 8, case 1735)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis