MPXV2202GC6T1 vs MPXV2202DP Comparaison
Comparaison détaillée côte à côte de MPXV2202GC6T1 par NXP Semiconductors et MPXV2202DP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPXV2202GC6T1 - 200kPa Vented Gauge Pressure Sensor | NXP/ST
MPXV2202GC6T1 ✓ ActifNXP Semiconductors
MPXV2202DP - 200 kPa Differential Pressure Sensor, 8-BSOP | STMicroelectronics
MPXV2202DP ✓ ActifComparaison des spécifications
| Paramètre | MPXV2202GC6T1 | MPXV2202DP |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,62 | $8,14 |
| Pressure Type | Vented Gauge | Differential (dual ports, same side) |
| Operating Pressure Range | 0 kPa to 200 kPa (0 PSI to 29.01 PSI) | 0 kPa to 200 kPa (0 PSI to 29.01 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Type de sortie | Analog voltage (Wheatstone bridge, ratiometric) | Analog ratiometric voltage |
| Plage de tension de sortie | 0 mV to 40 mV at 10 V excitation | — |
| Full-Scale Span (VFSS) | 40 mV nominal at 10 V | — |
| Supply Voltage (Excitation) | 10 V DC typical (16 V maximum per third-party listing) | — |
| Linearity | ±1.0 % VFSS (per MPX2202 datasheet family) | — |
| Temperature Compensation Range | 0 C to +85 C | — |
| Plage de température de fonctionnement | -40 C to +125 C (per MPX2202 family) | -40°C to +125°C |
| Port Size | 0.13 inch (3.17 mm) tube, top port | Male 0.13" (3.17 mm) Tube tubes, same side |
| Port Style | Male barbed, single axial port | — |
| Boîtier / Format | 8-SMD, Gull Wing, Top Port | — |
| Type de montage | Surface Mount (SMT) | Surface Mount, dual port top-side |
| Termination Style | PCB, gull-wing leads | — |
| Technology | Piezoresistive silicon MEMS | — |
| Bridge Impedance | [DATA_NEEDED: bridge input/output resistance] | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant |
| Full-Scale Output Span | — | 0 mV to 40 mV at 10 V supply |
| Supply Voltage (Vs) | — | 10 V typical (Vs max 16 V) |
| Offset (0 kPa) | — | 0 mV nominal |
| Linearity (best-fit straight line) | — | 0.25% typical (0.5% max) |
| Pressure Hysteresis | — | ±0.1% FS typical |
| Temperature Error (0°C to 85°C) | — | ±0.5% FS span, ±1% FS offset |
| Response Time | — | 1 ms typical |
| Frequency Response | — | 5 kHz typical |
| Storage Temperature Range | — | -40°C to +150°C |
| Boîtier | — | 8-BSOP (0.475" / 12.06 mm width) |
| Media Compatibility | — | Dry air (factory characterized) |