MPXV5004DP vs MPXV5004GP Comparaison

Comparaison détaillée côte à côte de MPXV5004DP par NXP Semiconductors et MPXV5004GP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
MPXV5004DP MPXV5004DP - 0-3.92kPa Differential Pressure Sensor | NXP

MPXV5004DP - 0-3.92kPa Differential Pressure Sensor | NXP

MPXV5004DP ✓ Actif
NXP Semiconductors
MPXV5004GP MPXV5004GP - 0-3.92 kPa Gauge Pressure Sensor | NXP | SO-8

MPXV5004GP - 0-3.92 kPa Gauge Pressure Sensor | NXP | SO-8

MPXV5004GP ✗ Fin de vie

Comparaison des spécifications

Paramètre MPXV5004DP MPXV5004GP
Marque NXP Semiconductors NXP Semiconductors
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Actif Fin de vie
Statut du stock In Stock In Stock
Prix unitaire (USD) $7,40 $8,20
Pressure Type Differential (Dual Port, Same Side) Gauge (vented)
Pressure Range 0 kPa to 3.92 kPa (0 to 0.57 PSI) 0 kPa to 3.92 kPa (0 to 0.57 PSI)
Port Type Male Tube, 3.3 mm O.D., Dual Same-Side Side port, male 0.13" (3.17 mm) tube
Tension d'alimentation 4.75 V to 5.25 V (5 V typical) 4.75 V to 5.25 V (nominal 5.0 V)
Courant d'alimentation 10 mA typical 10 mA (typical)
Plage de tension de sortie 1.0 V to 4.9 V at 5 V supply 1.0 V to 4.9 V
Type de sortie Analog, Ratiometric to VCC —
Accuracy ±1.5% Vfss typical (after auto-zero) [DATA_NEEDED: accuracy %FS over temperature]
Température de fonctionnement 0°C to +85°C —
Storage Temperature -30°C to +100°C -40 C to +125 C
Boîtier 8-BSOP (CASE 1351-01), 12.06 mm width 8-pin SOP (SOP-8), side port
Type de montage Surface Mount Surface Mount
Response Time 1 ms typical [DATA_NEEDED: response time ms]
Sensing Technology Piezoresistive (MEMS strain gauge) —
Statut RoHS Compliant Compliant
Signal Conditioning On-chip amplified and calibrated —
Sensitivity — 1.0 V/kPa (nominal)
Offset Voltage at 0 kPa — 1.0 V (nominal)
Plage de température de fonctionnement — 0 C to +85 C
AEC-Q100 — Qualified (automotive grade)
Technology — Piezoresistive MEMS with on-chip ASIC conditioning

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis