MPXV5004GC7U vs MPXV5010GC7U Comparaison

Comparaison détaillée côte à côte de MPXV5004GC7U par NXP Semiconductors et MPXV5010GC7U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
MPXV5004GC7U MPXV5004GC7U - 0-3.92 kPa Vented Gauge Pressure Sensor | NXP

MPXV5004GC7U - 0-3.92 kPa Vented Gauge Pressure Sensor | NXP

MPXV5004GC7U ✓ Actif
NXP Semiconductors
MPXV5010GC7U MPXV5010GC7U - 0-10kPa Differential Pressure Sensor | NXP

MPXV5010GC7U - 0-10kPa Differential Pressure Sensor | NXP

MPXV5010GC7U ✓ Actif

Comparaison des spécifications

Paramètre MPXV5004GC7U MPXV5010GC7U
Marque NXP Semiconductors NXP Semiconductors
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $7,10 $10,05
Pressure Type Vented Gauge Differential / Gauge
Operating Pressure Range 0 kPa to 3.92 kPa (0 to 0.57 PSI) 0 kPa to 10 kPa
Maximum Overpressure 16 kPa [DATA_NEEDED: maximum overpressure rating in kPa]
Tension d'alimentation 4.75 V to 5.25 V (5 V typical) 4.75 V to 5.25 V (typ. 5.0 V)
Plage de tension de sortie 1 V to 4.9 V —
Sensitivity 1 V/kPa (typical) —
Accuracy +/- 1.5 percent VFSS —
Température de fonctionnement 0 C to +85 C —
Storage Temperature -30 C to +100 C —
Port Type Top port tube, 0.13 inch (3.17 mm) diameter —
Type de sortie Analog, ratiometric voltage Analog (ratiometric to VCC)
Boîtier 8-pin DIP, 0.550 inch (13.97 mm), through-hole —
Media Compatibility Dry non-corrosive gases Non-corrosive, non-ionic media (dry air, dry gases)
Type de montage Through-hole Surface Mount
Statut RoHS [DATA_NEEDED: rohs_status] [DATA_NEEDED: RoHS compliance]
Full-Scale Output (typ. @10 kPa) — 4.5 V
Zero-Pressure Offset — 0.2 V to 0.85 V
Supply Current (typ.) — [DATA_NEEDED: supply current in mA]
Plage de température de fonctionnement — 0 °C to +85 °C
Storage Temperature Range — -30 °C to +100 °C
Output Impedance — < 50 ohm
Accuracy (typ.) — ±5 % of V_FSS (0-85 °C)
Response Time — [DATA_NEEDED: response time in ms]
Boîtier / Format — SOP-8 (Case 1737), Surface Mount
Port Configuration — Dual axial horizontal ports (gauge)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis