MPXV5004GVP vs MP3V5004GVP Comparaison

Comparaison détaillée côte à côte de MPXV5004GVP par NXP Semiconductors et MP3V5004GVP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
MPXV5004GVP MPXV5004GVP - 0/3.92kPa Vented Gauge Pressure Sensor | NXP

MPXV5004GVP - 0/3.92kPa Vented Gauge Pressure Sensor | NXP

MPXV5004GVP ⚠ Dernier achat
NXP Semiconductors
MP3V5004GVP MP3V5004GVP - 0-3.92kPa Gauge Pressure Sensor, 3V, SOP-8 | NXP

MP3V5004GVP - 0-3.92kPa Gauge Pressure Sensor, 3V, SOP-8 | NXP

MP3V5004GVP ✓ Actif

Comparaison des spécifications

Paramètre MPXV5004GVP MP3V5004GVP
Marque NXP Semiconductors NXP Semiconductors
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Dernier achat Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $6,60 $5,10
Pressure Type Vented Gauge Gauge
Operating Pressure Range 0 kPa to 3.92 kPa (0 to 0.57 PSI) 0 kPa to 3.92 kPa
Maximum Overpressure [DATA_NEEDED: maximum overpressure rating] —
Supply Voltage (VCC) 4.75 V to 5.25 V —
Courant d'alimentation [DATA_NEEDED: typical supply current] —
Type de sortie Analog Voltage (ratiometric) Analog, ratiometric voltage
Plage de tension de sortie 1.0 V to 4.9 V (nominal, at 5 V VCC) —
Output at 0 kPa 0.2 V typical at 5 V supply —
Output at Full Scale (3.92 kPa) 4.7 V typical at 5 V supply —
Sensitivity 1.0 V/kPa nominal —
Accuracy ±1.25% of VCC typical 5% over 0 to 80 C
Plage de température de fonctionnement 0°C to +85°C —
Storage Temperature Range [DATA_NEEDED: storage temperature range] —
Port Type Vertical, male 0.13" (3.3 mm) tube —
Boîtier / Format 8-SMD Module —
Type de montage Surface Mount Surface Mount
Technology Piezoresistive, monolithic silicon with thin-film metallization —
Termination Solder (SMD) —
Niveau MSL [DATA_NEEDED: MSL rating] —
Statut RoHS Compliant Compliant
Lead-Free Yes Yes
Pressure Resolution — Gage, ratiometric
Tension d'alimentation — 2.7 V to 3.3 V (3 V typical)
Tension de sortie — 0.6 V to 3 V (ratiometric)
Température de fonctionnement — 0 C to +85 C
Pressure Port — Bottom port (Case 482A)
Boîtier — SOP-8 (Small Outline Package)
Media Compatibility — Dry air, non-corrosive gases
On-Chip Signal Conditioning — Yes (amplification + temperature compensation)
Calibration — Factory calibrated

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis