MPXV5050VC6T1 vs MPXV5050GP Comparaison

Comparaison détaillée côte à côte de MPXV5050VC6T1 par STMicroelectronics et MPXV5050GP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

STMicroelectronics
MPXV5050VC6T1 MPXV5050VC6T1 - 50 kPa Vacuum Pressure Sensor, 5V, SOP-8

MPXV5050VC6T1 - 50 kPa Vacuum Pressure Sensor, 5V, SOP-8

MPXV5050VC6T1 ✓ Actif
NXP Semiconductors
MPXV5050GP MPXV5050GP - 0-50 kPa Vented Gauge Pressure Sensor | NXP / ST

MPXV5050GP - 0-50 kPa Vented Gauge Pressure Sensor | NXP / ST

MPXV5050GP ✓ Actif

Comparaison des spécifications

Paramètre MPXV5050VC6T1 MPXV5050GP
Marque STMicroelectronics NXP Semiconductors
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $8,95 $10,66
Pressure Type Vacuum / Negative Gauge —
Operating Pressure Range 0 to -50 kPa (0 to -7.25 PSI) —
Maximum Overpressure 200 kPa —
Supply Voltage (VCC) 4.75 V to 5.25 V (typical 5.0 V) —
Courant d'alimentation 5 mA typical —
Analog Output Range 0.1 V to 4.6 V at 5 V supply (ratiometric) —
Sensitivity 90 mV/kPa —
Type de sortie Ratiometric analog, single-ended Analog, ratiometric
Accuracy ±5% (0°C to 85°C) [DATA_NEEDED: full accuracy spec] —
Température de fonctionnement -40°C to +85°C [DATA_NEEDED: full operating range] 0C to +85C
Storage Temperature [DATA_NEEDED: storage temperature] [DATA_NEEDED: storage temperature range]
Response Time [DATA_NEEDED: response time] —
Port Configuration Top port, vertical tube, 0.13" (3.17 mm) tube —
Boîtier / Format 8-SMD, Gull Wing, SOP-8 (case 1737-02) [DATA_NEEDED: case dimensions] —
Type de montage Surface Mount Surface Mount
On-Chip Signal Conditioning Yes (amplified, temperature-compensated, calibrated) —
Technology Piezoresistive MEMS with bipolar op-amp network —
Statut RoHS Compliant (verified via distributor page) Compliant
Type de capteur — Vented Gauge Pressure Sensor
Pressure Range — 0 kPa to 50 kPa (0 PSI to 7.25 PSI)
Tension d'alimentation — 4.75 V to 5.25 V (5 V typical)
Tension de sortie — 0.2 V to 4.7 V (at 5 V supply)
Full-Scale Span — 4.5 V typical
Port Style — Male - 0.13 in (3.17 mm) vertical side tube
Boîtier — 8-SMD, Gull Wing, Side Port (SO SOT1693-1)
Body Size — 12.06 mm x 12.06 mm x 3.38 mm
Lead Pitch — 2.54 mm
Signal Conditioning — On-chip bipolar op-amp, thin-film temp compensation
Min Package Quantity — 25 (NXP tray)
Min Order Quantity — 250 (NXP budgetary)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis