MPXV7025GC6U vs MPVZ7025G6U Comparaison

Comparaison détaillée côte à côte de MPXV7025GC6U par STMicroelectronics et MPVZ7025G6U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

STMicroelectronics
MPXV7025GC6U MPXV7025GC6U - ±25kPa Compound Pressure Sensor, 5V | ST

MPXV7025GC6U - ±25kPa Compound Pressure Sensor, 5V | ST

MPXV7025GC6U ✓ Actif
NXP Semiconductors
MPVZ7025G6U MPVZ7025G6U - ±25kPa Compound Pressure Sensor, 5V, 8-SMD | NXP

MPVZ7025G6U - ±25kPa Compound Pressure Sensor, 5V, 8-SMD | NXP

MPVZ7025G6U ✓ Actif

Comparaison des spécifications

Paramètre MPXV7025GC6U MPVZ7025G6U
Marque STMicroelectronics NXP Semiconductors
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $8,40 $7,25
Pressure Type Compound (Gauge/Vacuum) Compound (Differential)
Pressure Range -25 kPa to +25 kPa (-3.63 to +3.63 PSI) —
Type de sortie Analog Voltage, Ratiometric Analog Voltage
Plage de tension de sortie 0.2 V to 4.7 V 0.2 V to 4.7 V (at 5 V supply)
Sensitivity 90 mV/kPa (nominal) —
Supply Voltage (VCC) 4.75 V to 5.25 V (5 V typical) —
Courant d'alimentation [DATA_NEEDED: supply current] [DATA_NEEDED: supply current]
Accuracy ±5 % (after calibration) ±5% (over compensated range)
Température de fonctionnement 0 °C to +85 °C -40 °C to +125 °C
Port Style Top, Axial, Male 3.18 mm (0.13 in) Tube No Port (Gel-filled sensing cavity)
Boîtier 8-SMD, Gull Wing, Top Port (SOP 8) —
Type de montage Surface Mount Surface Mount
Port Termination Axial barbed tube port —
Technology Piezoresistive MEMS, on-chip signal conditioned, temperature compensated, calibrated Piezoresistive MEMS, Monolithic Silicon
Niveau MSL [DATA_NEEDED: MSL level] —
Statut RoHS Compliant Compliant
Operating Pressure Range — -25 kPa to +25 kPa (-3.63 PSI to +3.63 PSI)
Maximum Overload Pressure — [DATA_NEEDED: maximum overload pressure]
Tension d'alimentation — 4.75 V to 5.25 V
Compensated Temperature — 0 °C to +85 °C
Boîtier / Format — 8-SMD Module, No Lead
Output Interface — Analog Voltage (ratiometric)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis