MSP430F417IPM vs MSP430F413IPM Comparaison

Comparaison détaillée côte à côte de MSP430F417IPM par Texas Instruments et MSP430F413IPM par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
MSP430F417IPM MSP430F417IPM - 8MHz 16-bit MCU 32KB Flash 96-seg LCD | TI

MSP430F417IPM - 8MHz 16-bit MCU 32KB Flash 96-seg LCD | TI

MSP430F417IPM ✓ Actif
Texas Instruments
MSP430F413IPM MSP430F413IPM - 8MHz 16-Bit MCU with 8KB Flash | Texas Instruments

MSP430F413IPM - 8MHz 16-Bit MCU with 8KB Flash | Texas Instruments

MSP430F413IPM ✓ Actif

Comparaison des spécifications

Paramètre MSP430F417IPM MSP430F413IPM
Marque Texas Instruments Texas Instruments
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Core Architecture MSP430 CPU16 (RISC, 16-bit) —
Series MSP430x4xx —
Fréquence d'horloge maximale 8 MHz 8 MHz
Instruction Cycle Time 125 ns —
Program Memory (Flash) 32 KB (32K x 8 + 256B) —
SRAM 1 KB 256 bytes
Supply Voltage Range 1.8 V to 3.6 V 1.8 V to 3.6 V
Active Mode Current (1 MHz, 2.2 V) 200 µA —
Standby Mode Current 0.7 µA —
Off Mode Current (RAM Retention) 0.1 µA —
Wake-Up Time from Standby < 6 µs —
Power-Saving Modes 5 —
Clock System FLL+ (Frequency-Locked Loop) —
LCD Driver 96 segments —
Timers 16-bit Timer_A —
Analog Comparator Yes —
Scan Interface (Scan IF) Yes —
GPIO Pins 48 —
Boîtier 64-pin LQFP (PM, 10x10 mm) 64-pin LQFP, 10 mm × 10 mm
Type de montage Surface Mount Surface mount
Température de fonctionnement -40°C to +85°C (Industrial) —
Statut RoHS Compliant (Green Package) Not specified
Product Type — 16-bit mixed-signal microcontroller
CPU Architecture — MSP430 16-bit RISC
Flash Memory — 8 KB
Active Current — 200 µA at 1 MHz and 2.2 V
Standby Current — 0.7 µA
Off-Mode Current with RAM Retention — 0.1 µA
Low-Power Modes — 5 modes
Standby Wake-Up Time — Less than 6 µs
LCD Segment Drive Capability — 96 segments
I/O Pin Count — 48 pins
Integrated Comparator — 1 comparator
Timer Resources — One or two 16-bit timers depending on family configuration
Clocking — Frequency-Locked Loop (FLL+)
REACH Status — Not specified
Niveau MSL — 3, 260°C, 168 hours

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis