NC7SV125P5X vs SN74LVC1G125DBVR Comparaison
Comparaison détaillée côte à côte de NC7SV125P5X par onsemi et SN74LVC1G125DBVR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
onsemi
NC7SV125P5X - TinyLogic ULP-A Non-Inverting 3-State Buffer, SC-70-5 | onsemi
NC7SV125P5X ✓ ActifTexas Instruments
SN74LVC1G125DBVR - 1.65-5.5V 3-State Buffer Gate | TI | SOT-23-5
SN74LVC1G125DBVR ✓ ActifComparaison des spécifications
| Paramètre | NC7SV125P5X | SN74LVC1G125DBVR |
|---|---|---|
| Marque | onsemi | Texas Instruments |
| Catégorie | Logic ICs | Logic ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,15 | $0,13 |
| Manufacturer | onsemi | — |
| Series | TinyLogic ULP-A | — |
| Logic Type | Buffer, Non-Inverting | — |
| Number of Elements | 1 | 1 |
| Number of Bits per Element | 1 | — |
| Type de sortie | 3-State (Tri-State) | 3-State |
| VCC Supply Voltage | 0.9 V to 3.6 V | — |
| Output Drive (IOH/IOL) at 3.3 V VCC | ±24 mA | — |
| Quiescent Current (ICC) max | [DATA_NEEDED: quiescent current in µA] | — |
| Propagation Delay (tpd) max | [DATA_NEEDED: tpd in ns] | — |
| Température de fonctionnement | -40 °C to +85 °C | -40C to +125C |
| Boîtier | SC-70-5 | SOT-23-5 (DBV) |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 1 (unlimited floor life) | 1 (260C, unlimited) |
| Statut RoHS | Compliant | ROHS3 Compliant |
| Lead-Free / Pb-Free | Yes | — |
| Output Enable (OE\) Polarity | Active-Low (OE\ high = Hi-Z output) | — |
| Fonction | — | Single non-inverting buffer / line driver |
| Logic Family | — | LVC (Low-Voltage CMOS) |
| Bits per Element | — | 1 |
| Supply Voltage (VCC) | — | 1.65 V to 5.5 V |
| Input Voltage Tolerance | — | Up to 5.5 V (independent of VCC) |
| Maximum Quiescent Current (ICC) | — | 10 uA |
| Output Drive (IOUT) | — | +/-24 mA at 3.3 V |
| Output Enable | — | Active-low OE (high = Hi-Z) |
| Ioff / Partial-Power-Down | — | Supported |
| Propagation Delay (tpd) | — | Specified at 3.3 V (see datasheet) |