NE5532ANG vs NE5532P Comparaison
Comparaison détaillée côte à côte de NE5532ANG par onsemi et NE5532P par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | NE5532ANG | NE5532P |
|---|---|---|
| Marque | onsemi | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | Dual internally compensated operational amplifier | — |
| Number of Amplifier Circuits | 2 circuits | — |
| Tension d'alimentation de fonctionnement | 3 V to 20 V | — |
| Boîtier | 8-pin PDIP | 8-pin PDIP (P) |
| Total Pin Count | 8 pins | — |
| Type de montage | Through-hole | Through hole |
| Noise Classification | Low-noise operational amplifier | — |
| Compensation | Internal | — |
| Primary Application Category | Audio and instrumentation amplification | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Unity-Gain Bandwidth | [DATA_NEEDED: unity-gain bandwidth] | 10 MHz typical |
| Input Noise Voltage Density | [DATA_NEEDED: input noise voltage density] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 4000 µV maximum |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 9 V/µs typical |
| Output Current Capability | [DATA_NEEDED: output current capability] | — |
| Short-Circuit Protection | [DATA_NEEDED: short-circuit protection] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Amplifier Count | — | 2 amplifiers |
| Product Type | — | Dual low-noise operational amplifier |
| Maximum Supply Voltage | — | 30 V |
| Supply Voltage Range | — | ±5 V to ±15 V |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical with VCC = ±18 V and RL = 600 ohm |
| Process Technology | — | Bipolar |
| Température de fonctionnement | — | 0 °C to 70 °C |
| Primary Application | — | Audio |