NE5532D vs NE5532AD8 Comparaison
Comparaison détaillée côte à côte de NE5532D par Texas Instruments et NE5532AD8 par onsemi. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
NE5532D - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5532D ✓ ActifComparaison des spécifications
| Paramètre | NE5532D | NE5532AD8 |
|---|---|---|
| Marque | Texas Instruments | onsemi |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,00 | $0,25 |
| Amplifier Type | Dual low-noise operational amplifier | Operational Amplifier |
| Number of Amplifier Circuits | 2 circuits | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | 5 nV/√Hz typical at 1 kHz [DATA_NEEDED: full noise density figure from datasheet] |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| DC Voltage Gain | 100 V/mV typical | — |
| Slew Rate | 10 V/μs typical | 9 V/µs typical |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Specified Supply Voltage Range | ±5 V to ±15 V | — |
| Maximum Total Supply Voltage | 30 V | — |
| Output Voltage Swing | 32 V peak-to-peak typical at ±18 V and 600 Ω load | — |
| Plage de température de fonctionnement | 0 °C to +70 °C for NE5532x | 0 °C to +70 °C |
| Boîtier | 8-pin SOIC | 8-pin SOIC (D8, SO-8), 3.90 mm body width |
| Type de montage | Surface Mount | Surface Mount |
| Product Category | Standard general-purpose amplifier | — |
| Application Category | Audio applications | — |
| Manufacturer | Texas Instruments | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain at specified frequency] | — |
| Noise at 20 Hz to 20 kHz | [DATA_NEEDED: total input noise over audio bandwidth] | — |
| Number of Channels | — | 2 (Dual) |
| Supply Voltage (Single) | — | 6 V to 40 V |
| Supply Voltage (Dual) | — | ±3 V to ±20 V |
| Total Harmonic Distortion (THD) | — | 0.002 % at 1 kHz, 600 Ω load |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage (NE5532A grade)] 0.5 mV typical |
| Output Current | — | [DATA_NEEDED: rated output drive current] |
| Channel Separation | — | 110 dB at 1 kHz typical |
| MSL (Moisture Sensitivity Level) | — | MSL-1 / 1 (unlimited floor life per JEDEC J-STD-020) |
| Lead-Free | — | Yes |
| Compensation | — | Internally compensated (no external cap required) |
| Input Protection | — | Diodes on both inputs |
| Output Protection | — | Short-circuit protection |