NE5532P vs NE5532DR Comparaison

Comparaison détaillée côte à côte de NE5532P par Texas Instruments et NE5532DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Comparaison des spécifications

Paramètre NE5532P NE5532DR
Marque Texas Instruments Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Amplifier Count 2 amplifiers —
Product Type Dual low-noise operational amplifier —
Maximum Supply Voltage 30 V —
Supply Voltage Range ±5 V to ±15 V —
Unity-Gain Bandwidth 10 MHz typical 10 MHz typical
Slew Rate 9 V/µs typical 10 V/μs typical
Equivalent Input Noise Voltage 5 nV/√Hz typical at 1 kHz 5 nV/√Hz typical at 1 kHz
Common-Mode Rejection Ratio 100 dB typical 100 dB typical
High DC Voltage Gain 100 V/mV typical —
Peak-to-Peak Output Voltage Swing 32 V typical with VCC = ±18 V and RL = 600 ohm —
Input Offset Voltage 4000 µV maximum —
Process Technology Bipolar —
Boîtier 8-pin PDIP (P) 8-pin SOIC
Type de montage Through hole Surface Mount
Température de fonctionnement 0 °C to 70 °C —
Primary Application Audio —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Amplifier Type — Dual low-noise operational amplifier
Number of Amplifier Circuits — 2 circuits
DC Voltage Gain — 100 V/mV typical
Specified Supply Voltage Range — ±5 V to ±15 V
Maximum Total Supply Voltage — 30 V
Output Voltage Swing — 32 V peak-to-peak typical at ±18 V and 600 Ω load
Plage de température de fonctionnement — 0 °C to +70 °C for NE5532x
Product Category — Standard general-purpose amplifier
Application Category — Audio applications
Manufacturer — Texas Instruments
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]
Lead-Free Status — [DATA_NEEDED: lead-free status]
Halogen-Free Status — [DATA_NEEDED: halogen-free status]
Courant d'alimentation — [DATA_NEEDED: supply current]
Input Bias Current — [DATA_NEEDED: input bias current]
Open-Loop Gain — [DATA_NEEDED: open-loop gain at specified frequency]
Noise at 20 Hz to 20 kHz — [DATA_NEEDED: total input noise over audio bandwidth]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis