NE5534ADG vs NE5534DR Comparaison
Comparaison détaillée côte à côte de NE5534ADG par onsemi et NE5534DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
NE5534DR - 30V, 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5534DR ✓ ActifComparaison des spécifications
| Paramètre | NE5534ADG | NE5534DR |
|---|---|---|
| Marque | onsemi | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Single low-noise operational amplifier | Single low-noise operational amplifier |
| Number of Amplifiers | 1 circuit | — |
| Supply Voltage Range | 3 V to 20 V | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Slew Rate | 13 V/us | 13 V/us typical |
| Amplifier Type | General purpose | — |
| Boîtier | 8-SOIC, 0.154 inch (3.90 mm) width | 8-SOIC |
| Type de montage | Surface mount | Surface Mount |
| Packaging | Tube | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Input Voltage Noise Density | [DATA_NEEDED: input voltage noise density] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Output Swing | [DATA_NEEDED: output voltage swing] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Manufacturer | — | Texas Instruments |
| Number of Circuits | — | 1 |
| Total Supply Voltage | — | 10 V to 30 V |
| Equivalent Input Noise Voltage | — | 3.5 nV/Hz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| DC Voltage Gain | — | 100 dB typical |
| Open-Loop Voltage Gain | — | 100 V/mV typical |
| Supply Configuration | — | ±5 V to ±15 V |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at ±18 V |
| Output Current Capability | — | [DATA_NEEDED: output current capability] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |