NE5534ADR2 vs NE5534PSR Comparaison
Comparaison détaillée côte à côte de NE5534ADR2 par onsemi et NE5534PSR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
NE5534PSR - Single 10 MHz Low-Noise Op Amp | Texas Instruments (Tape & Reel)
NE5534PSR ✓ ActifComparaison des spécifications
| Paramètre | NE5534ADR2 | NE5534PSR |
|---|---|---|
| Marque | onsemi | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | General Purpose | — |
| Number of Circuits | 1 circuit | — |
| Topologie | Single operational amplifier | — |
| Input Voltage Noise Density | 3.5 nV/√Hz typical | — |
| Gain-Bandwidth Product | 10 MHz typical | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Slew Rate | 13 V/µs typical | 13 V/µs |
| High DC Voltage Gain | 100 V/mV typical | — |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typical |
| Peak-to-Peak Output Voltage Swing | 32 V typical at VCC+ +18 V and 600 W | 32 V typical at VCC = ±18 V and RL = 600 Ω |
| Boîtier | 8-SOIC, 0.154 inch width, 3.90 mm width | 8-pin SOIC |
| Packaging | Tape and reel | — |
| Type de montage | Surface mount | Surface mount |
| Product Description | Single high-performance low-noise operational amplifier | — |
| Manufacturer | onsemi | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Operational Amplifier Type | — | Single low-noise operational amplifier |
| Maximum Supply Voltage | — | 30 V |
| Equivalent Input Noise Voltage | — | 3.5 nV/√Hz |
| DC Voltage Gain | — | 100 dB typical |
| Output Drive Capability | — | High |
| Small-Signal Bandwidth | — | High; exact value not stated in verified snippets |
| Power Bandwidth | — | High; exact value not stated in verified snippets |
| Distortion | — | Low; exact numeric value not stated in verified snippets |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Output Voltage Swing | — | 32 V peak-to-peak typical at VCC = ±18 V and RL = 600 Ω |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |