NE5534ADRE4 vs NE5534DR Comparaison
Comparaison détaillée côte à côte de NE5534ADRE4 par Texas Instruments et NE5534DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
NE5534DR - 30V, 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5534DR ✓ ActifComparaison des spécifications
| Paramètre | NE5534ADRE4 | NE5534DR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | Single general-purpose operational amplifier | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Input Noise Density | 3.5 nV/√Hz typical | — |
| DC Voltage Gain | 100 dB typical | 100 dB typical |
| Open-Loop Gain | 100 V/mV typical | — |
| Slew Rate | 13 V/ms typical | 13 V/us typical |
| Peak-to-Peak Output Swing | 32 V typical at VCC+ = +18 V and RL = 600 Ω | — |
| Supply Voltage Range | +3 V to +20 V | — |
| Total Supply Current | 38 mA per channel | — |
| Input Bias Current | 500 nA typical | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | 10 dB typical as shown in source snippet | 100 dB typical |
| Offset Nulling | Supported | — |
| External Compensation | Supported | — |
| Boîtier | 8-SOIC (0.154 inch, 3.90 mm width) | 8-SOIC |
| Nombre de broches | 8 pins | — |
| Type de montage | Surface mount | Surface Mount |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | Single low-noise operational amplifier |
| Manufacturer | — | Texas Instruments |
| Number of Circuits | — | 1 |
| Total Supply Voltage | — | 10 V to 30 V |
| Equivalent Input Noise Voltage | — | 3.5 nV/Hz |
| Open-Loop Voltage Gain | — | 100 V/mV typical |
| Supply Configuration | — | ±5 V to ±15 V |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at ±18 V |
| Output Current Capability | — | [DATA_NEEDED: output current capability] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |