NE5534DR vs NE5532ADR Comparaison
Comparaison détaillée côte à côte de NE5534DR par Texas Instruments et NE5532ADR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
NE5534DR - 30V, 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5534DR ✓ ActifTexas Instruments
NE5532ADR - 30V, 10MHz Dual Low-Noise Op Amp | Texas Instruments
NE5532ADR ✓ ActifComparaison des spécifications
| Paramètre | NE5534DR | NE5532ADR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Single low-noise operational amplifier | Dual low-noise operational amplifier |
| Manufacturer | Texas Instruments | — |
| Number of Circuits | 1 | — |
| Boîtier | 8-SOIC | 8-pin SOIC |
| Type de montage | Surface Mount | Surface mount |
| Total Supply Voltage | 10 V to 30 V | — |
| Equivalent Input Noise Voltage | 3.5 nV/Hz | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| DC Voltage Gain | 100 dB typical | — |
| Slew Rate | 13 V/us typical | 9 V/µs |
| Open-Loop Voltage Gain | 100 V/mV typical | — |
| Supply Configuration | ±5 V to ±15 V | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Peak-to-Peak Output Voltage Swing | 32 V typical at ±18 V | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | 0°C to +70°C for NE5532x |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Current Capability | [DATA_NEEDED: output current capability] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Number of Amplifiers | — | 2 circuits |
| Maximum Supply Voltage | — | 30 V |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Gain-Bandwidth Product | — | 10 MHz |
| Extended-Temperature Variant | — | -40°C to +85°C for SA5532x |
| Type de sortie | — | Rail-to-rail output |
| Input Voltage | — | [DATA_NEEDED: input voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Voltage Noise Density | — | [DATA_NEEDED: voltage noise density] |
| Current Noise Density | — | [DATA_NEEDED: current noise density] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Output Current | — | [DATA_NEEDED: output current] |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |