OPA134PA vs OPA137PA Comparaison
Comparaison détaillée côte à côte de OPA134PA par Texas Instruments et OPA137PA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | OPA134PA | OPA137PA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Operational Amplifier Type | Single high-performance audio operational amplifier | — |
| Channel Count | 1 circuit | — |
| Gain-Bandwidth Product | 8 MHz | 1 MHz |
| Input Bias Current | 50 pA | ±10 pA |
| Input Noise Density | 8 nV/√Hz | [DATA_NEEDED: input noise density] |
| Total Harmonic Distortion | 0.00008% | — |
| Slew Rate | 20 V/µs | 3.5 V/µs |
| Open-Loop Gain | 600 | 145 dB |
| Supply Voltage Range | ±18 V | — |
| Input Stage | True FET input | — |
| Product Family | SoundPlus high-performance audio operational amplifier | MicroAmplifier |
| Boîtier | 8-pin PDIP | 8-pin PDIP |
| Type de montage | Through-hole | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Power-Supply Rejection Ratio | [DATA_NEEDED: power-supply rejection ratio] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Amplifier Type | — | Single J-FET-input operational amplifier |
| Number of Amplifier Channels | — | 1 channel |
| Maximum Supply Voltage | — | 36 V |
| Nominal Total Supply Voltage | — | ±18 V |
| Courant de repos | — | 120 µA per channel |
| Maximum Input Offset Voltage | — | 15 mV |
| Input Common-Mode Range | — | Rail-to-rail input to V+ |
| Package Type | — | Through-hole PDIP |
| Courant d'alimentation | — | [DATA_NEEDED: maximum supply current] |
| Output Current | — | [DATA_NEEDED: output current] |
| Short-Circuit Current | — | [DATA_NEEDED: short-circuit current] |
| Niveau MSL | — | [DATA_NEEDED: moisture sensitivity level] |