OPA137P vs OPA137UA Comparaison
Comparaison détaillée côte à côte de OPA137P par Texas Instruments et OPA137UA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | OPA137P | OPA137UA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Single FET-input operational amplifier | — |
| Manufacturer | Texas Instruments | — |
| Supply Voltage Range | To ±18 V | — |
| Maximum Supply Voltage | 36 V | 36 V |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Input Bias Current | ±5 pA typical | — |
| Input Offset Voltage | 1.5 mV maximum | 1.5 mV |
| Courant de repos | 120 μA per channel | — |
| Open-Loop Gain | 145 dB | — |
| Input Common-Mode Range | Rail-to-rail input to V+ | Rail-to-rail to the positive supply |
| Number of Channels | 1 channel | 1 channel |
| Boîtier | 8-pin PDIP | 8-SOIC, 0.154 in (3.90 mm) width |
| Type de montage | Through-hole | — |
| Series | MicroAmplifier | — |
| Input Type | FET input | — |
| Primary Application | Low-level analog signal conditioning | — |
| Operating Voltage | ±18 V maximum supply | — |
| Supplier Package Designation | PDIP-8 | — |
| Amplifier Type | — | Single FET-input operational amplifier |
| Typical Input Bias Current | — | ±10 pA |
| Listed Input Bias Current | — | 5 pA |
| Typical Quiescent Current | — | 120 µA per channel |
| Listed Quiescent Current | — | 220 µA |
| Typical Open-Loop Gain | — | 145 dB |
| Input Offset Voltage Temperature Drift | — | 15 µV/°C |
| Slew Rate | — | 3.5 V/µs |
| Channel Separation | — | 76 dB |
| Protection Features | — | Short-circuit protection and ESD protection |
| Statut RoHS | — | RoHS compliant |