OPA137UA vs OPA131UJ Comparaison

Comparaison détaillée côte à côte de OPA137UA par Texas Instruments et OPA131UJ par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
OPA137UA OPA137UA - 36V, 1MHz FET-Input Op Amp | Texas Instruments

OPA137UA - 36V, 1MHz FET-Input Op Amp | Texas Instruments

OPA137UA ✓ Actif
Texas Instruments
OPA131UJ OPA131UJ - 4MHz Low-Power J-FET Op Amp | Texas Instruments

OPA131UJ - 4MHz Low-Power J-FET Op Amp | Texas Instruments

OPA131UJ ✓ Actif

Comparaison des spécifications

Paramètre OPA137UA OPA131UJ
Marque Texas Instruments Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Amplifier Type Single FET-input operational amplifier Single J-FET operational amplifier
Number of Channels 1 channel 1 circuit
Maximum Supply Voltage 36 V —
Gain-Bandwidth Product 1 MHz 4 MHz
Input Common-Mode Range Rail-to-rail to the positive supply —
Typical Input Bias Current ±10 pA —
Listed Input Bias Current 5 pA —
Typical Quiescent Current 120 µA per channel —
Listed Quiescent Current 220 µA —
Typical Open-Loop Gain 145 dB —
Input Offset Voltage 1.5 mV —
Input Offset Voltage Temperature Drift 15 µV/°C —
Slew Rate 3.5 V/µs 10 V/µs
Channel Separation 76 dB —
Protection Features Short-circuit protection and ESD protection —
Boîtier 8-SOIC, 0.154 in (3.90 mm) width 8-pin SOIC
Statut RoHS RoHS compliant [DATA_NEEDED: RoHS status]
Maximum Input Bias Current — 50 pA
Power Consumption — 750 µA
Supply Voltage Range — ±4.5 V to ±18 V
Total Supply Voltage — 9 V to 36 V
Input Bias Current Type — FET input
Offset Voltage — [DATA_NEEDED: offset voltage]
Offset Voltage Drift — [DATA_NEEDED: offset voltage drift]
Input Common-Mode Voltage Range — [DATA_NEEDED: input common-mode voltage range]
Output Swing Range — [DATA_NEEDED: output swing range]
Open-Loop Gain — [DATA_NEEDED: open-loop gain]
Input Noise Density — [DATA_NEEDED: input noise density]
Plage de température de fonctionnement — [DATA_NEEDED: operating temperature range]
Type de montage — Surface mount
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis