OPA637BP vs OPA2107AP Comparaison
Comparaison détaillée côte à côte de OPA637BP par Texas Instruments et OPA2107AP par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
OPA637BP - 80MHz Precision Difet Op Amp DIP-8 | Texas Instruments
OPA637BP ✓ ActifComparaison des spécifications
| Paramètre | OPA637BP | OPA2107AP |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $11,80 | $5,45 |
| Amplifier Type | Precision High-Speed Difet Operational Amplifier | Precision Dual Difet Operational Amplifier |
| Number of Channels | 1 | 2 |
| Bandwidth (Unity-Gain Crossover) | 80 MHz | — |
| Slew Rate | 135 V/us | 18 V/us |
| Supply Voltage Range | +/-4.5 V to +/-18 V | +/-10 V to +/-18 V (20 V to 36 V total) |
| Input Offset Voltage (Max) | 100 uV | — |
| Offset Voltage Drift (Max) | 0.8 uV/C | — |
| Input Bias Current (Max) | 5 pA | — |
| Output Noise Density | [DATA_NEEDED: output noise voltage density at 10 kHz] | — |
| Settling Time (0.01%) | [DATA_NEEDED: settling time to 0.01%] | — |
| Stability | Stable in closed-loop gain >= 5 (decompensated) | — |
| Input Type | JFET (Difet process) | — |
| Boîtier | 8-PDIP (DIP-8) | 8-PDIP (DIP-8) |
| Type de montage | Through Hole | Through Hole |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range for AP grade] |
| Grade | B (precision grade) | — |
| Statut RoHS | unknown | [DATA_NEEDED: RoHS compliance status] |
| Manufacturer | Texas Instruments | — |
| Gain Bandwidth Product | — | 4.5 MHz |
| Input Offset Voltage | — | 1 mV max |
| Offset Voltage Drift | — | 10 uV/C max |
| Input Bias Current | — | 10 pA max |
| Input Voltage Noise | — | [DATA_NEEDED: input voltage noise density at 10 kHz] |
| Settling Time | — | Fast settling to 0.01% |
| Unity-Gain Stable | — | Yes |
| Output per Amplifier | — | Standard (General Purpose) |