PCA9515APWT vs PCA9515APWR Comparaison
Comparaison détaillée côte à côte de PCA9515APWT par Texas Instruments et PCA9515APWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
PCA9515APWT - 2-Channel I2C Buffer, 400kHz | Texas Instruments
PCA9515APWT ✓ ActifTexas Instruments
PCA9515APWR - 2-Channel 400kHz I2C/SMBus Repeater | TI (Tape & Reel)
PCA9515APWR ✓ ActifComparaison des spécifications
| Paramètre | PCA9515APWT | PCA9515APWR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Dual bidirectional I2C bus and SMBus repeater | Dual bidirectional I2C bus and SMBus repeater |
| Number of Buffer Channels | 2 channels | — |
| Supply Voltage Range | 2.3 V to 3.6 V VCC | — |
| Maximum I2C Bus Frequency | 400 kHz | — |
| I2C I/O Voltage Tolerance | 5.5 V tolerant | 5.5 V tolerant |
| Enable Input Voltage Tolerance | 5.5 V tolerant | — |
| I2C Interface Type | Open-drain | — |
| Signal Direction | Bidirectional | — |
| Repeater Enable | Active-high | — |
| Supported Protocol | I2C and SMBus | — |
| Mixed-Mode Operation | Supported | — |
| Process Technology | BiCMOS | — |
| Boîtier | 8-pin TSSOP (PW) | 8-pin TSSOP (PW) |
| Package Dimensions | 0.173 inch, 4.40 mm width | — |
| Type de montage | Surface mount | Surface mount |
| Ordering Suffix | PWT | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of Channels | — | 2 channels |
| Tension d'alimentation de fonctionnement | — | 2.3 V to 3.6 V |
| Maximum Bus Frequency | — | 400 kHz |
| I2C Compatibility | — | I2C and SMBus |
| Bus Architecture | — | Bidirectional open-drain buffer |
| Enable Input | — | Active-high EN with internal pullup |
| Powered-Off I2C Pins | — | High impedance |
| Signal Mode Support | — | Standard Mode and Fast Mode |
| Multiple Master Support | — | Supported |
| Mixed-Mode Signal Operation | — | Supported |
| ESD Classification | — | Class II |
| Latch-Up Performance | — | Exceeds 100 mA per JESD 78 |