PCA9554PW vs TCA9554PWR Comparaison

Comparaison détaillée côte à côte de PCA9554PW par NXP Semiconductors et TCA9554PWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
PCA9554PW PCA9554PW - 8-Bit I/O Expander with Interrupt | NXP

PCA9554PW - 8-Bit I/O Expander with Interrupt | NXP

PCA9554PW ✓ Actif
Texas Instruments
TCA9554PWR TCA9554PWR - 8-Bit I2C I/O Expander | Texas Instruments

TCA9554PWR - 8-Bit I2C I/O Expander | Texas Instruments

TCA9554PWR ✓ Actif

Comparaison des spécifications

Paramètre PCA9554PW TCA9554PWR
Marque NXP Semiconductors Texas Instruments
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type 8-bit I2C/SMBus I/O expander with interrupt —
Number of GPIO 8 bits —
Supply Voltage Range 2.3 V to 5.5 V 1.65 V to 5.5 V
I2C/SMBus Maximum Frequency 400 kHz —
I2C/SMBus Supported Frequency 100 kHz and 400 kHz —
Interface I2C-bus/SMBus I2C / SMBus
Interrupt Support Yes —
Port Register Features Input/output and polarity configuration registers —
Pull-Up Capability Weak pull-up —
Address Difference PCA9554A has a different address —
Boîtier 16-pin TSSOP 16-TSSOP
Type de montage Surface mount Surface mount
Température de fonctionnement [DATA_NEEDED: Operating temperature range] —
Maximum Output Current per Pin [DATA_NEEDED: Maximum output current per pin] —
Input Voltage Levels [DATA_NEEDED: Input voltage thresholds] —
Output Drive Capability [DATA_NEEDED: Output drive current and output voltage characteristics] —
Standby Current [DATA_NEEDED: Standby current] [DATA_NEEDED: standby current]
Operating Current [DATA_NEEDED: Typical and maximum operating current] —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] —
Device Type — 8-bit I/O expander
I/O Port Count — 8 ports
Maximum I2C Bus Frequency — 400 kHz
Interrupt Output — Yes
Configuration Registers — Yes
Weak Pull-Up Configuration — Yes
Address Inputs — A0, A1, A2
Maximum Devices Per Bus — 8 devices
Nombre de broches — 16 pins
Reset Behavior — Power-on reset to default state
Input Port Function — 8-bit general-purpose input
Output Port Function — 8-bit general-purpose output
Plage de température de fonctionnement — [DATA_NEEDED: operating temperature range]
Output Current per Port — [DATA_NEEDED: output current per port]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis