PCA9555PW vs PCA8575PW,118 Comparaison
Comparaison détaillée côte à côte de PCA9555PW par NXP Semiconductors et PCA8575PW,118 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | PCA9555PW | PCA8575PW,118 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,00 | $1,04 |
| Device Type | 16-bit I2C-bus/SMBus GPIO expander | — |
| Number of GPIO Ports | 16 ports | — |
| Boîtier | 24-pin TSSOP | 24-TSSOP (4.40 mm body width, 0.65 mm pitch) |
| Supply Voltage Range | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| I2C/SMBus Frequency | 400 kHz | — |
| Interrupt Support | Yes | — |
| Default GPIO Pull-Up Resistors | Yes | — |
| I/O Direction | Configurable input or output per port bit | — |
| Device Interface | I2C-bus/SMBus | — |
| Logic Family | CMOS | — |
| Type de montage | Surface mount | Surface Mount |
| Nombre de broches | 24 pins | — |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Output Drive Current | [DATA_NEEDED: output drive current] | [DATA_NEEDED: per-pin sink current] |
| Input Leakage Current | [DATA_NEEDED: input leakage current] | — |
| I2C Address Options | [DATA_NEEDED: I2C address options] | — |
| Power Consumption | [DATA_NEEDED: power consumption] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Fonction | — | 16-bit I2C-bus I/O Expander with Interrupt |
| Number of I/O | — | 16 |
| Interface | — | I2C (SCL/SDA) |
| Clock Frequency (Max) | — | 400 kHz (Fast-mode) |
| I/O Type | — | Quasi-bidirectional |
| Interrupt Output | — | Yes (open-drain INT, active low) |
| Hardware Address Pins | — | 3 (A0, A1, A2 - up to 8 devices on bus) |
| Standby Current | — | [DATA_NEEDED: ICC standby] |
| Plage de température de fonctionnement | — | -40 C to +85 C (industrial) |
| Packaging | — | Digi-Reel (Tape & Reel) |
| Niveau MSL | — | 1 (per JEDEC J-STD-020) |