PCF8574N vs PCF8574P Comparaison
Comparaison détaillée côte à côte de PCF8574N par Texas Instruments et PCF8574P par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | PCF8574N | PCF8574P |
|---|---|---|
| Marque | Texas Instruments | NXP Semiconductors |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | 8-bit I2C I/O expander | — |
| Supply Voltage Range | 2.5V to 6V | 2.5 V to 6 V |
| I2C Bus Frequency | 100kHz | 100 kHz |
| Number of I/O Ports | 8 | 8 ports |
| Interface | I2C two-line bidirectional bus | — |
| Interrupt Function | Interrupt output | — |
| Boîtier | 16-pin PDIP | 16-pin DIP |
| Type de montage | Through-hole | Through-hole |
| Operating Voltage | 2.5V to 6V VCC operation | — |
| Device Description | Remote 8-bit input/output expander | — |
| Port Configuration | Quasi-bidirectional I/O | — |
| Bus Address | [DATA_NEEDED: I2C device address] | — |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| Nombre de broches | 16 pins | — |
| Device Type | — | Remote 8-bit I2C I/O expander with interrupt |
| Port Width | — | 8 bits |
| Bus Interface | — | Two-wire bidirectional I2C-bus |
| Serial Clock Pin | — | SCL |
| Serial Data Pin | — | SDA |
| Hardware Address Inputs | — | 3 inputs |
| Interrupt Output | — | 1 open-drain interrupt output |
| Port Type | — | 8 quasi-bidirectional I/O ports |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Maximum Port Output Current | — | [DATA_NEEDED: maximum port output current] |
| I2C Pull-Up Requirement | — | External pull-up resistors required |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |