PCF8575PWG4 vs PCF8575PWR Comparaison

Comparaison détaillée côte à côte de PCF8575PWG4 par Texas Instruments et PCF8575PWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
PCF8575PWG4 PCF8575PWG4 - 16-Bit I2C I/O Expander | Texas Instruments

PCF8575PWG4 - 16-Bit I2C I/O Expander | Texas Instruments

PCF8575PWG4 ✓ Actif
Texas Instruments
PCF8575PWR PCF8575PWR - 16-Bit I2C I/O Expander | Texas Instruments

PCF8575PWR - 16-Bit I2C I/O Expander | Texas Instruments

PCF8575PWR ✓ Actif

Comparaison des spécifications

Paramètre PCF8575PWG4 PCF8575PWR
Marque Texas Instruments Texas Instruments
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Device Type 16-bit I2C and SMBus I/O expander with interrupt —
Number of I/O Ports 16 —
Port Organization 2 ports of 8 I/O lines —
Supply Voltage Range 2.5 V to 5.5 V —
I2C Maximum Clock Frequency 400 kHz —
Type d'interface I2C and SMBus I2C and SMBus
Interrupt Output Open-drain active-low Open-drain
Address Configuration 3 hardware address inputs —
Power-On Port State All I/O lines high —
I/O Architecture Quasi-bidirectional input/output —
Standby Current 10 uA maximum 10 microamperes maximum
Boîtier 24-TSSOP, 4.40 mm body width 24-pin TSSOP
Number of Terminals 24 —
Type de montage Surface mount Surface mount
Temperature Grade Industrial —
Lead-Free / Green Yes —
Statut RoHS [DATA_NEEDED: RoHS compliance statement] —
REACH Status [DATA_NEEDED: REACH compliance statement] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Standard I/O Pin Drive Current [DATA_NEEDED: per-pin output sink and source current ratings] —
Plage de température de fonctionnement [DATA_NEEDED: exact operating temperature range for PCF8575PWG4] [DATA_NEEDED: operating temperature range]
Number of I/O Lines — 16
Number of Ports — 2 x 8-bit
Tension d'alimentation de fonctionnement — 2.5 V to 5.5 V
I2C Maximum Bus Frequency — 400 kHz
Hardware Address Inputs — 3
Maximum Devices per Bus — 8 devices
Power-On I/O State — High
I/O Direction Control — Not required
Output Drive Capability — High-current drive for directly driving LEDs
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]
Lead-Free Status — [DATA_NEEDED: lead-free status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis