PCM5122PW vs PCM5121PW Comparaison

Comparaison détaillée côte à côte de PCM5122PW par Texas Instruments et PCM5121PW par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
PCM5122PW PCM5122PW - 112dB Stereo Audio DAC | Texas Instruments

PCM5122PW - 112dB Stereo Audio DAC | Texas Instruments

PCM5122PW ✓ Actif
Texas Instruments
PCM5121PW PCM5121PW - 106dB Stereo Audio DAC | Texas Instruments

PCM5121PW - 106dB Stereo Audio DAC | Texas Instruments

PCM5121PW ✓ Actif

Comparaison des spécifications

Paramètre PCM5122PW PCM5121PW
Marque Texas Instruments Texas Instruments
Catégorie ADC/DAC ADC/DAC
Statut du cycle de vie Actif Actif
Product Type Stereo audio digital-to-analog converter —
Configuration de sortie 2 channels —
Dynamic Range 112 dB —
Maximum Output Amplitude 2 V RMS —
Digital Audio Resolution Up to 32 bit —
Maximum Sampling Rate 384 kHz 384 kHz
Digital Audio Interface PCM interface —
Control Interface I2C and SPI —
Supply Voltage Range 3 V to 3.6 V [DATA_NEEDED: supply voltage range]
Plage de température de fonctionnement -25 °C to +85 °C [DATA_NEEDED: operating temperature range]
Boîtier 28-pin TSSOP (PW) 28-pin TSSOP
Type de montage Surface mount Surface mount
Output Architecture DirectPath 2 V RMS DirectPath
Audio Processing Fixed audio processing Fixed audio processing
Output Impedance [DATA_NEEDED: output impedance] —
Signal-to-Noise Ratio [DATA_NEEDED: signal-to-noise ratio] —
Total Harmonic Distortion plus Noise [DATA_NEEDED: THD+N] —
Power Consumption [DATA_NEEDED: power consumption] —
Statut RoHS unknown [DATA_NEEDED: RoHS status]
REACH Status unknown [DATA_NEEDED: REACH status]
AEC-Q100 Qualification unknown —
Device Type — Stereo audio digital-to-analog converter
Dynamic Performance — 106 dB
Maximum Output Voltage — 2 V RMS
Interface Format — PCM
Supported Audio Word Lengths — 16 bit, 24 bit, 32 bit
DAC Architecture — Segment-DAC architecture
Output Channels — 2 channels: OUTL and OUTR
Load Coupling Support — DC-coupled or AC-coupled loads
Out-of-Band Noise Improvement — Up to 20 dB lower than existing DAC technology
Clock Jitter Tolerance — Improved tolerance; numerical value not stated
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis