SI2404-D-FS vs SI2434-D-FS Comparaison

Comparaison détaillée côte à côte de SI2404-D-FS par Skyworks Solutions et SI2434-D-FS par Skyworks Solutions. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Skyworks Solutions
SI2404-D-FS SI2404-D-FS 56kbps ISOmodem IC | Skyworks | 16-SOIC

SI2404-D-FS 56kbps ISOmodem IC | Skyworks | 16-SOIC

SI2404-D-FS ✓ Actif
Skyworks Solutions
SI2434-D-FS SI2434-D-FS 33.6 kbps ISOMODEM | Skyworks Solutions

SI2434-D-FS 33.6 kbps ISOMODEM | Skyworks Solutions

SI2434-D-FS ✓ Actif

Comparaison des spécifications

Paramètre SI2404-D-FS SI2434-D-FS
Marque Skyworks Solutions Skyworks Solutions
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type System-side ISOmodem data communications IC ISOMODEM system-side interface IC
Manufacturer Skyworks Solutions —
Base Data Rate 2,400 bps —
Maximum Family Data Rate 56,000 bps with the appropriate line-side companion device —
Supported Modem Formats V.21, V.22, V.23, V.29, Bell 103, Bell 212A —
Related Family Modem Formats ITU-T and Bell formats, V.44, V.42, V.42bis, MNP2-5 —
Rate Negotiation Automatic rate negotiation —
Fast Connect Supported by the SI2404/34/15/04 family documentation —
Caller ID Type I and Type II decode —
Boîtier 16-pin SOIC 16-SOIC, 0.154 in (3.90 mm) width
Type de montage Surface mount Surface mount
Product Category Network controller and processor IC / ISOModem —
Tension d'alimentation [DATA_NEEDED: supply voltage range] 3 V to 3.6 V
Température de fonctionnement [DATA_NEEDED: operating temperature range] —
Clock Requirements [DATA_NEEDED: clock frequency and tolerance] —
Power Consumption [DATA_NEEDED: typical and maximum supply current] —
Analog Interface [DATA_NEEDED: analog signal and impedance requirements] —
Statut RoHS [DATA_NEEDED: RoHS status] RoHS compliant
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Terminal Finish [DATA_NEEDED: lead-free and halogen-free status] —
Maximum Data Rate — 33.6 kbps
Supported Modulation — V.21, V.22, V.23, V.29, V.32
Bell Support — Bell 103 and Bell 212A
Nombre de broches — 16 pins
Telephone Line Architecture — Direct access arrangement (DAA) modem interface
Line-Side Companion — Si3018 or Si3010 family device
Lead-Free Status — Lead free
Plage de température de fonctionnement — [DATA_NEEDED: operating temperature range]
Maximum Input Voltage — [DATA_NEEDED: maximum input voltage]
Interface Standards — ITU-T V.21, V.22, V.23, V.29, V.32 and Bell 103, 212A
Clock Requirement — [DATA_NEEDED: clock and crystal requirements]
Shutdown or Power Control — [DATA_NEEDED: power-control features]
External Component Requirements — [DATA_NEEDED: external component list]
Qualification Standard — [DATA_NEEDED: automotive or industrial qualification status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis