SN65HVD230DR vs MCP2551-I-SN Comparaison
Comparaison détaillée côte à côte de SN65HVD230DR par Texas Instruments et MCP2551-I-SN par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ ActifMicrochip Technology
MCP2551-I/SN - High-Speed CAN Transceiver, 1Mb/s, ISO-11898 | Microchip
MCP2551-I-SN ⚠ Dernier achatComparaison des spécifications
| Paramètre | SN65HVD230DR | MCP2551-I-SN |
|---|---|---|
| Marque | Texas Instruments | Microchip Technology |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Dernier achat |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,94 | $0,71 |
| Product Type | CAN Bus Transceiver | — |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Protocol | CANbus (ISO 11898-2) | CANbus (ISO-11898) |
| Tension d'alimentation | 3 V to 3.6 V (3.3 V nominal) | 4.5 V to 5.5 V |
| Maximum Data Rate | 1 Mbps | — |
| Driver/Receiver Configuration | Half-Duplex | — |
| Standby Mode Supply Current | 370 uA typical | — |
| ESD Protection (Bus Pins, HBM) | Exceeds 16 kV | — |
| Maximum Nodes on Bus | 120 nodes | — |
| Receiver Common-Mode Range | -2 V to 7 V | — |
| Température de fonctionnement | -40C to +85C | -40 C to +125 C (Industrial, I grade) |
| Boîtier | 8-SOIC (D) | 8-pin SOIC (SN, 0.154" / 3.90 mm width) |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | — |
| RS Pin Function | Slew-rate control via external resistor | — |
| Fonction | — | High-Speed CAN Transceiver |
| Data Rate (max) | — | 1 Mb/s |
| Common-Mode Range | — | -2 V to +7 V (typical ISO-11898-2) |
| Slope Control | — | Yes (RS pin, externally adjustable) |
| Standby Mode | — | Yes (low-current via Rs pin) |
| VREF Output | — | Yes (approx. VDD/2) |
| Bus Dominant Fault Detection | — | Yes (automatic receiver-only mode) |
| ESD Protection (CAN bus pins) | — | [DATA_NEEDED: HBM/CDM ESD rating] |
| Niveau MSL | — | 1 (per JEDEC J-STD-020, not explicitly stated in source) |